BBGvHOST wrote unplug all the cables from the xbox and then take out the hdd and then put the hdd back in and then plug in all the cables again and try letting it cool down a little more its better for those type of motherboards cause i have lots of jtags i have just sold out but i am getting 3 more jtag ables before friday and we have a kv scheduled for friday or saturday if you want a spot you will have to pay $30 cause it is a type 2 and i just took it off this FALCON if you want proof i will send and cancel the kv on aim

aim is

mttspring @ yahoo.com

hope this will help u and[size=24] TTG[/size]

I've tried that many times...

Look at my post

Open up your xbox 360. Have everything down to the bare motherboard.

You Will Need:
-To open your xbox
-Toothpic or Wirebrush (no joke)
-Thermal Paste or Artic 5 Silver Compound
-A RRoD xbox lol

1)You will need to remove the x clamps and carefully take out both the gpu and CPU.

2)Take a toothpic or wire brush and very carefully scrub or pic away the gray rubbery goop on the CPU and gpu chips.

3)Take some artic 5 thermal compound or a computer based thermal paste, and reapply on top of the gpu and cpu. Use a toothpic to do so.

4) Next put the gpu and CPU things back in, screw back in and put on x clamps if u can.

5)Put your xbox back together, but leave one half of the case off, so u cAn do the next step.

6)Plug in your 360. It should still be red ringed. Unplug the fan from the xbox and turn on the xbox. Let ur xbox sit, while on for about 20 minutes, or untill the three rings turn into 2.

7)Once they are 2 flashing lights, remove the power cord from the back of the xbox. Let the xbox cool off, as it was just overheated. Turn it back on and bam! No more red ring of death baby.

I am now getting a E 79 error! I guess that is better then a blank screen right? Does anyone know a fix for this? PLEASE respond!

Johhny wrote What error is it?
It might Just Be That Your hard Drive isnt In rite

jaspers_rock wrote

Johhny wrote What error is it?
It might Just Be That Your hard Drive isnt In rite

It's E79.

How'd u fix the rrod? My tut?
And E79 - This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD. It can also be related to wiring the diodes while JTAGGING.

coolbunny1234 wrote How'd u fix the rrod? My tut?
And E79 - This error occurs when your harddrive is defective, it might still work sometimes....
There is also a small chance that it is a cold joint under the Southbridge causing problems with the I/O of the HDD. It can also be related to wiring the diodes while JTAGGING.

Yeah, that's what I'm guessing, loose wiring. I'm just gonna take a look at it later this week. Too much stuff going on to be messing with a jtag this week

Sucks man, lemme know of you need any more help

I no how to fix your jtag! Do you have AIM.

ya red ring suks man!!!