These are the controllers that I have in stock, one of the black ones has the 1st and fourth quadrant led, another has only the first which is purple and is a button rapid fire mod, the other black one has all the leds and is not modded at all, the wireless controller has the first quadrant led only and it is orange, the wired one has no leds but works fine. The wireless controllers dont have battery packs.

These are all the screws for the xboxes I have and hard drives, there are five clips to go on the rf module.

There are about 180 washers in the metal and rubber washer set, there are like 80 bolts as well.

There are a total of 210 stars thermal paste packets in that bag.

There's five wind tunnels for the consoles.

Theres five of the faceplates for the consoles, 2 of them don't have usb covers.

All of those ends are paired up so those are for 6 and a half consoles.

Those are two xenon power bricks with the cords.

Those are 2 av cables obviously.

Those are 2 hard drives and a case, the custom hard drive has blue leds in it and is a 20 gb hard drive, the other 60 gb hard drive is a xenon jtag pre loaded hard drive. The other 60 gb case is just the case.

Those are 7 consoles in the cage and one motherboard on top of the cases. There are 7 xenon consoles and one falcon console. Three xenon motherboard consoles are jtagable and are ready to be jtagged, 4 others including 3 xenon consoles need to be reballed as well as the hdmi falcon needs to be reballed. I have a xenon jtag that has no video and audio and I tried to fix it but it didn't work so you most likely need to reball it.