You are viewing our Forum Archives. To view or take place in current topics click here.
How to Flash your jtag with FBuild 0.30
Posted:
How to Flash your jtag with FBuild 0.30Posted:
Status: Offline
Joined: Apr 12, 201113Year Member
Posts: 108
Reputation Power: 6
Disclaimer: This is NOT the original post i got this from [ Register or Signin to view external links. ] i was just posting it on here because not everyone goes on there, so all credit for making this tut goes to hundshamer at thetechgame.org
P.S. I have Checked this and it works 100% if you need help either post on the original post or post here and i will try my best.
P.P.S The original post has pictures included.
The Following Tutorial Only Works With Dashboard 9199 & Higher.
01. Get your CPU key by running Xell/Xellous.
02. Extract "FbBuild Tut.rar" and drag the "FbBuild 0.30" folder to your desktop.
03. Copy the "Flash360" folder to a USB device.
04. Run Flash360 with FSD or XeXmenu and make dump of your NAND.
05. Copy "flashdmp.bin" to the "FbBuid 0.30" folder.
06. Open 360 Flash Tool.
07. Select Settings then Keys.
08. Enter your CPU Key.
09. Open your "flashdmp.bin" from Flash360.
10. Click "Extract".
11. Check "SMC", "Key Vault", "Config Blocks", and click "OK".
12. Save it to the "mydata" folder in the "fbbuild" folder.
13. Open the "KV" folder, rename "KV_dec.bin" to "kv.bin", and move it to the "mydata" folder.
14. Open the "SMC" folder, rename "SMC_dec.bin" to "smc.bin", and move it to the "mydata" folder.
15. Delete the "KV" and "SMC" folders. The "mydata" folder.
16. Open the "cpukey.txt" file in the "mydata" folder and enter your CPU key.
17. Drag your "flashdmp.bin" over "mobileExtract.exe".
18. Copy the files from the "flashdmp_out" folder to the "mydata" folder.
20. Copy the .bat file that corresponds to the flash type you want to install from the ".bat Files" folder to the "FbBuild 0.30" folder and run it.
21. Copy "updflash.bin" to the USB drive (put in the root of the USB drive for Xell/Xellous install, or in the "Flash 360" folder for installing through Flash360) and install using your preferred method.
22. Unplug the 360 from the power brick for at least 30 seconds and plug it back in.
23. Open the "System Update" folder, copy the corresponding update folder you need to your USB device, and rename the folder to $systemupdate.
24. Copy the "Dahlaunch Installer" folder to the USB device.
25. Insert USB device into the 360, boot it normally, and allow it to update.
26. Run the DashLaunch installer in FSD or XeXmenu and follow the prompts.
Download:
[ Register or Signin to view external links. ]
I hope this helps. Please +rep if it does.
EDIT: Added P.S & P.P.S
P.S. I have Checked this and it works 100% if you need help either post on the original post or post here and i will try my best.
P.P.S The original post has pictures included.
The Following Tutorial Only Works With Dashboard 9199 & Higher.
01. Get your CPU key by running Xell/Xellous.
02. Extract "FbBuild Tut.rar" and drag the "FbBuild 0.30" folder to your desktop.
03. Copy the "Flash360" folder to a USB device.
04. Run Flash360 with FSD or XeXmenu and make dump of your NAND.
05. Copy "flashdmp.bin" to the "FbBuid 0.30" folder.
06. Open 360 Flash Tool.
07. Select Settings then Keys.
08. Enter your CPU Key.
09. Open your "flashdmp.bin" from Flash360.
10. Click "Extract".
11. Check "SMC", "Key Vault", "Config Blocks", and click "OK".
12. Save it to the "mydata" folder in the "fbbuild" folder.
13. Open the "KV" folder, rename "KV_dec.bin" to "kv.bin", and move it to the "mydata" folder.
14. Open the "SMC" folder, rename "SMC_dec.bin" to "smc.bin", and move it to the "mydata" folder.
15. Delete the "KV" and "SMC" folders. The "mydata" folder.
16. Open the "cpukey.txt" file in the "mydata" folder and enter your CPU key.
17. Drag your "flashdmp.bin" over "mobileExtract.exe".
18. Copy the files from the "flashdmp_out" folder to the "mydata" folder.
20. Copy the .bat file that corresponds to the flash type you want to install from the ".bat Files" folder to the "FbBuild 0.30" folder and run it.
21. Copy "updflash.bin" to the USB drive (put in the root of the USB drive for Xell/Xellous install, or in the "Flash 360" folder for installing through Flash360) and install using your preferred method.
22. Unplug the 360 from the power brick for at least 30 seconds and plug it back in.
23. Open the "System Update" folder, copy the corresponding update folder you need to your USB device, and rename the folder to $systemupdate.
24. Copy the "Dahlaunch Installer" folder to the USB device.
25. Insert USB device into the 360, boot it normally, and allow it to update.
26. Run the DashLaunch installer in FSD or XeXmenu and follow the prompts.
Download:
[ Register or Signin to view external links. ]
I hope this helps. Please +rep if it does.
EDIT: Added P.S & P.P.S
You are viewing our Forum Archives. To view or take place in current topics click here.