You are viewing our Forum Archives. To view or take place in current topics click here.
How to open NAT (Tut)
Posted:
How to open NAT (Tut)Posted:
Status: Offline
Joined: Jan 10, 201014Year Member
Posts: 6,021
Reputation Power: 495
Status: Offline
Joined: Jan 10, 201014Year Member
Posts: 6,021
Reputation Power: 495
i dont take credit for this.
<3
Organ
Step 1: Get your Xbox 360's IP address from the system blade and choose network settings. Then edit settings should show your Xbox's IP.
Step 2: Go into your routers configuration window thru Internet Explorer. In the address bar type in your routers IP address. It should be default at 192.168.1.1 or 192.168.2.1. When you're prompted for a password you have found it =P. If you haven't changed it the username and password should both be admin, and admin.
Step 3: USING DMZ When you enter into your router config window, you need to find the Tab DMZ, it should be under applications and gaming if you are using Linksys. Once you find the DMZ tab, click enable and type in the last digits of your XBOX into the box below. Yes when you do this you are opening all the ports on your Xbox, which is insecure, but show me someone that has hacked into an xbox 360?
Step 4:Using Port Fowarding After you have enabled DMZ, find the Port Fowarding tab, should be under advanced routing. For the name type in XBL or whatever you want, and for port range put 87 to 89, choose UDP, then your XBOX last digits, and enable. Then do 3073 to 3075 choose TCP, then your XBOX last digits, and enable. Then again do 3073 to 3075 choose UDP, then your XBOX last digits, and enable.
Step 5:Using UPnP This is just incase. Go into UPnP fowarding and enter in the same stuff you did for Step 4.
Step 6: Now logout of your router config. Unplug your router and modem from the power, then plug in the router 1st, wait 30 seconds. Then plug in the modem and wait at least 2 minutes. If you don't do these hard restarts it might not work!
Step 7: Restart your Xbox and go to the system blade, choose network settings, then test connection. This may take a bit, but when it gets down to NAT type it should say OPEN. If not, sorry. You can just undo all the settings we changed, you can just uncheck enabled on the port fowarding. or if you want to restore your router to the factory defaults just push the reset button on the back of it.
Once again this may not work for everyone, but it worked for me and my friends, so good luck.
Last edited by Organ ; edited 1 time in total
<3
Organ
Step 1: Get your Xbox 360's IP address from the system blade and choose network settings. Then edit settings should show your Xbox's IP.
Step 2: Go into your routers configuration window thru Internet Explorer. In the address bar type in your routers IP address. It should be default at 192.168.1.1 or 192.168.2.1. When you're prompted for a password you have found it =P. If you haven't changed it the username and password should both be admin, and admin.
Step 3: USING DMZ When you enter into your router config window, you need to find the Tab DMZ, it should be under applications and gaming if you are using Linksys. Once you find the DMZ tab, click enable and type in the last digits of your XBOX into the box below. Yes when you do this you are opening all the ports on your Xbox, which is insecure, but show me someone that has hacked into an xbox 360?
Step 4:Using Port Fowarding After you have enabled DMZ, find the Port Fowarding tab, should be under advanced routing. For the name type in XBL or whatever you want, and for port range put 87 to 89, choose UDP, then your XBOX last digits, and enable. Then do 3073 to 3075 choose TCP, then your XBOX last digits, and enable. Then again do 3073 to 3075 choose UDP, then your XBOX last digits, and enable.
Step 5:Using UPnP This is just incase. Go into UPnP fowarding and enter in the same stuff you did for Step 4.
Step 6: Now logout of your router config. Unplug your router and modem from the power, then plug in the router 1st, wait 30 seconds. Then plug in the modem and wait at least 2 minutes. If you don't do these hard restarts it might not work!
Step 7: Restart your Xbox and go to the system blade, choose network settings, then test connection. This may take a bit, but when it gets down to NAT type it should say OPEN. If not, sorry. You can just undo all the settings we changed, you can just uncheck enabled on the port fowarding. or if you want to restore your router to the factory defaults just push the reset button on the back of it.
Once again this may not work for everyone, but it worked for me and my friends, so good luck.
Last edited by Organ ; edited 1 time in total
The following 1 user thanked Organ for this useful post:
Sin_oh (05-23-2010)
#2. Posted:
Status: Offline
Joined: Apr 14, 201014Year Member
Posts: 1,733
Reputation Power: 906
Status: Offline
Joined: Apr 14, 201014Year Member
Posts: 1,733
Reputation Power: 906
Thanks for this man
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: May 13, 201014Year Member
Posts: 535
Reputation Power: 26
Status: Offline
Joined: May 13, 201014Year Member
Posts: 535
Reputation Power: 26
You would Post this...
Because, What you told me actually worked the other day.
Good SH*T! Lol.
Nice Post - Smokez <3
Because, What you told me actually worked the other day.
Good SH*T! Lol.
Nice Post - Smokez <3
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Jan 10, 201014Year Member
Posts: 6,021
Reputation Power: 495
Status: Offline
Joined: Jan 10, 201014Year Member
Posts: 6,021
Reputation Power: 495
Well alot of people have a problem connecting to smokey, i did, then i opened my nat.
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: May 13, 201014Year Member
Posts: 535
Reputation Power: 26
Status: Offline
Joined: May 13, 201014Year Member
Posts: 535
Reputation Power: 26
TTG_Organ wrote Well alot of people have a problem connecting to smokey, i did, then i opened my nat.
Haha.. Bro.
I love you. [;
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: May 03, 201014Year Member
Posts: 579
Reputation Power: 27
Status: Offline
Joined: May 03, 201014Year Member
Posts: 579
Reputation Power: 27
I <3 You.
Gay Strict Nat FTL!
Cheers,
Thekowgoesmoo
P.s If I had rep Id give you some.
Gay Strict Nat FTL!
Cheers,
Thekowgoesmoo
P.s If I had rep Id give you some.
- 0useful
- 0not useful
#7. Posted:
Status: Offline
Joined: May 03, 200915Year Member
Posts: 2,505
Reputation Power: 425
Status: Offline
Joined: May 03, 200915Year Member
Posts: 2,505
Reputation Power: 425
very nice tutorial man!
- 0useful
- 0not useful
#8. Posted:
Status: Offline
Joined: Dec 21, 200915Year Member
Posts: 851
Reputation Power: 60
Status: Offline
Joined: Dec 21, 200915Year Member
Posts: 851
Reputation Power: 60
thanks this helped since i always have nat strict
- 0useful
- 0not useful
#9. Posted:
Status: Offline
Joined: May 21, 201014Year Member
Posts: 25
Reputation Power: 0
Thank you for this it actualy worked and made it easier to get into games
- 0useful
- 0not useful
#10. Posted:
Status: Offline
Joined: Jun 24, 200915Year Member
Posts: 11,066
Reputation Power: 1528
Status: Offline
Joined: Jun 24, 200915Year Member
Posts: 11,066
Reputation Power: 1528
Thanks for this mate
My nat gies strict every once in awhile
My nat gies strict every once in awhile
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.