do you have a 12v fan mod, or are your fans turned to 100% in fsd? those are not bad temps at all, but it would better if they were a little lower.

Not too good of temps. your GPU is running really high. It needs some fresh themal paste probaly. The CPU is supposed to run hotter than the GPU. GPU and MEM are going to be within 5 degrees of each other. My xenon runs 130 on the CPU and 110 on the GPU and thats after 2 or 3 hours of playing need for speed hot pursuite or dead island.

Wow, my Xenon was running everything lower than 68 Degrees. Of course, I do have a 12v fan.

I have my fan on 12v from fsd and i have another 12v computer fan but its kind of wimpy and i put a zepher heatsink on the gpu and put new thermal paste on so ill repost with new idle temps.

anything i can do to make the gpu run less hot? cause the temps are still the same

i would suggest buying some fans. My falcon runs at
GPU:55 CPU:63 MEM: 58

but your numbers are pretty high, new thermal paste and a 12v fan or aftermarket fan would help also.

TTG_DIRTY_SOUTH wrote i would suggest buying some fans. My falcon runs at
GPU:55 CPU:63 MEM: 58

but your numbers are pretty high, new thermal paste and a 12v fan or aftermarket fan would help also.

his temps are actually about the same as yours, hes just got his in Fahrenheit and you have yours in Celsius. To the op if you wanted to try and lower your temps... take off the old and add new thermal compound to your chips. Also since you have your fans running at 100% on fsd you could add a case fan to it. they look cool and keep air flowing through your console lowering the temperature.

Forums/t=2256242/xenon-jtag-temps.html

Thanks for the feedback guys, but I think I might need a reflow soon because sometimes it freezes and the video does some strange things every so often. And ive done everything people say and I still can't get the gpu to run any cooler