How to Flash Any Phat LiteOn Drive with LT+ 3.0

---

*Note* After the 13146 Dashboard Update, LiteOn DVD Drives are No Longer Detected as 74850c, 83850c, or 93450c. The Firmware on all Phat LiteOn Drives is 0251c. Another Note, This is for all PHAT Xbox 360s not Slim.

[ Register or Signin to view external links. ]

Team-Xecuter's CK3i
(Recommended for All Flashes)

Buy it if You're from:
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

---

[ Register or Signin to view external links. ]

Team-Xecuter's CK3 Pro with the USB Cable
(Recommended for All Flashes)

Buy it if You're from:
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

---

[ Register or Signin to view external links. ]

Team-Xecuter's X360USB Pro
(Recommended for All Flashes)

Buy it if You're from:
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

---

[ Register or Signin to view external links. ]

Team-Xecuter's Probe v3
(Not Needed for BenQ, Samsung, or Hitachi. NEEDED for LiteOn Flash)

Buy it if You're from:
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

---

[ Register or Signin to view external links. ]

Any Molex Power Supply (External or from the Computer)
(Recommended for Any Flash)

[ Register or Signin to view external links. ]

---

What You Need to Open the Xbox 360

[ Register or Signin to view external links. ]
(Linked to Lowes Website)

[ Register or Signin to view external links. ]

Step 1.) Unplug everything from your Xbox 360. AV Cables, HDD, Power Cable, USBs, etc...

Step 2.) Take off the Faceplate to your Xbox 360 and look at the top where the HDD would normally go.

Step 3.) There are 2 (Two) Slots towards the front of the Xbox 360. Stick the T9 Torx Screwdriver in there until you hear a click, and the do it in the other slot. When they both click, pull the front up.

[ Register or Signin to view external links. ]

Step 4.) Now that you have the Top, you have to get the Middle, and the Bottom. On the Side (still on the top near the HDD) there are 2 Filled in White Holes. Stick the T9 Torx Screwdriver in between the filled in hole until you hear the click, just like before. Then do it on the other side, and lift up.

[ Register or Signin to view external links. ]

Step 5.) Then do the Bottom. Like the middle, there are 2 Filled in White Holes. Stick the Screwdriver in between them and hear the click. Do it to the other side, and lift up. Now the entire top panel should be off.

Step 6.) Now that the entire top panel is off, you have to do the bottom. The bottom is just like the top. There are 3 Filled in White Holes, as seen in the picture below. Just stick the T9 Screwdriver into there, hear the clicks, do it on the other side, and lift.

[ Register or Signin to view external links. ]

Step 7.) Now you have the Face Plate off, the Top Panel, and the Bottom Panel off.

Step 8.) Now this, is the hardest part of the entire process.

Step 9.) You will see on the front of the Xbox 360 there are 3 Tabs. All the way to the Left, Under the Warranty Sticker, and All the Way to the Right.

[ Register or Signin to view external links. ]

Step 10.) Stick your nail, or something small, under the tabs, and lift up. Your Xbox 360 Should now be able to do this.

[ Register or Signin to view external links. ]

Step 11.) This is hard to do for Some people, but trust me. Turn the Xbox 360 Upside down, and pull the entire side of the Xbox Back AS HARD as you can. It should Detach entirely from the Xbox 360. Your Xbox 360 should now have 1 (One) Entire half missing.

Step 12.) Now take off the DVD Eject Button.

Step 13.) Now take the Torx T9 Screwdriver, and unscrew the 6 Indicated Screws.

[ Register or Signin to view external links. ]

Step 14.) Turn it around, after everything is unscrewed, and lift the remaining White half of the Xbox 360 up.

Step 15.) You should Now be able to see the Motherboard and the DVD Drive.

[ Register or Signin to view external links. ]

---

Step 1.) Take out the DVD Drive from the Xbox 360 by removing the Power and the SATA Chord from the Back of it.

[ Register or Signin to view external links. ]

Step 2.) Turn the DVD Drive over and you'll see 4 Screws Indicated below.

[ Register or Signin to view external links. ]

Step 3.) Unscrew the Screws with a Regular Philips Screwdriver.

Step 4.) Remove the Bottom Panel of the DVD Drive so you can see the bottom of the laser and the Motherboard.
[ Register or Signin to view external links. ]

Step 5.) NOW We are Completely ready to Flash the Drive.

Your setup should look somewhat similar to this:
[ Register or Signin to view external links. ]

Step 6.) On the motherboard, locate the point, MPX01. (This is the Probe Point)

[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

Step 7.) Extract the file you SHOULD HAVE [ Register or Signin to view external links. ] Go to Everything to Flash, JungleFlasher (LT+ 1.91), and Open JungleFlasher. If you're on Vista or 7 Run as Administrator.

Step 8.) Go to the DVDKey 32 Tab. Under I/O Port go through every single option until you see your drive pop up. On the Right Under Com Port, Choose COM3 or COM4 (Whichever one is the CK3 Pro).

Step 9.) Click on the Button PhatKey, and this Message will Pop-Up:
[ Register or Signin to view external links. ]

Step 10.) You HAVE to do this VERY FAST. Put the Probe 3 on the Probe Point, MPX01. Hit Yes to the Pop-Up, with the probe still on, and push down the button then let go within a Second.

[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

Step 11.) If done correctly, another Pop-Up will come up saying this:
[ Register or Signin to view external links. ]

Step 12.) Remove the Probe. Hit Ok and Hold the Probe Button for 5 Seconds and then let go.

Step 13.) If this is done correctly, a box will come up asking you to save files. Make a folder in "My Documents" called Keys. Save every file it asks you to in there.

[ Register or Signin to view external links. ]

Step 14.) After you save Dummy.bin it was ask if you would like to Auto-Load Lite-on iXtreme LT+ Firmware. Hit Yes.

[ Register or Signin to view external links. ]

Step 15.) After you hit yes, you will notice that the Top Box and the Bottom Box are exactly the same, if they're not, hit "Spoof Source to Target" 3-5 Times.
[ Register or Signin to view external links. ]

Step 16.) Go into the MTK Flash 32 Tab at the Top of JungleFlasher.

Step 17.) Hit the Lite-On Erase button you will get 2 Pop-Ups, one right after the other. Hit Yes, to the First One.
[ Register or Signin to view external links. ]

Step 18.) GET READY! The Second Pop-Up will come up. Hit Yes, wait about 1-2 Second(s) TURN OFF your CK3 Pro, and then TURN IT BACK ON all within less then 2 Seconds.

Step 19.) If done correctly, your Settings should be Identical, or very close to my settings on the right. If you DID NOT get it, hit the button that says "Intro / Device ID". A Pop-Up will come up, hit Ok and again, turn off your CK3 Pro and Turn it back on. This time within 1 Second.

[ Register or Signin to view external links. ]

Step 20.) Once your settings are correct, hit Write.

Step 21.) It will now begin to Write the iXtreme LT+ 3.0 Firmware to Your LiteOn DVD Drive.

Step 22.) Once complete JungleFlasher will say this.
[ Register or Signin to view external links. ]

Step 23.) Once the Flash is Verified hit Outro / ATA Reset.
[ Register or Signin to view external links. ]

Step 24.) Make Sure that Your Settings are the same as mine, and your DVD Key is Verified.

[ Register or Signin to view external links. ]

Step 25.) Eject your Drive to Make sure it works, and then eject it to close it.

Step 26.) Turn off the CK3 Pro's Power, Unplug the SATA Cable, and the Power Cable from the Back of your DVD Drive. Put the Back Panel back onto the DVD Drive and Screw it in. Put the Xbox 360 Back together and Enjoy Playing Back-Ups

Thank You
~No0b3rT