You are viewing our Forum Archives. To view or take place in current topics click here.
Xbox 360 Controller L.E.D Installation Tutorial [Detailed]
Posted:
Xbox 360 Controller L.E.D Installation Tutorial [Detailed]Posted:
Status: Offline
Joined: Aug 11, 201113Year Member
Posts: 1,275
Reputation Power: 75
What You Will Need:
Torx T8
Soldering Iron + Solder
Tweezers (optional)
0603 LEDS
Time
Wipe (to clean the solder)
Step 1: Tape all the A X Y and the Start/Back + Guide Ring down to the controller so they don't fall off. Unscrew all the screws of the back of the controller.
Step 2: Take the case off and remove the board, + the thumbsticks and rubber inside.
Step 3: Remove these 4 leds using your solder. [To solder it out, place solder on the soldering iron, and simply tap around the edges of the leds. Remove the LEDS carefully if you wish to reuse them]
Step 4:Place the new LED's positive side to the bolded white and solder it in place.
Step 5: Test if it works by placing it on the back piece of the controller shell, and place the rubber in place. Also, place the battery in place, and turn it on, and check if it works.
Thanks <3
Torx T8
Soldering Iron + Solder
Tweezers (optional)
0603 LEDS
Time
Wipe (to clean the solder)
Step 1: Tape all the A X Y and the Start/Back + Guide Ring down to the controller so they don't fall off. Unscrew all the screws of the back of the controller.
Step 2: Take the case off and remove the board, + the thumbsticks and rubber inside.
Step 3: Remove these 4 leds using your solder. [To solder it out, place solder on the soldering iron, and simply tap around the edges of the leds. Remove the LEDS carefully if you wish to reuse them]
Step 4:Place the new LED's positive side to the bolded white and solder it in place.
Step 5: Test if it works by placing it on the back piece of the controller shell, and place the rubber in place. Also, place the battery in place, and turn it on, and check if it works.
Thanks <3
#2. Posted:
Status: Offline
Joined: Jun 19, 201113Year Member
Posts: 70
Reputation Power: 2
nice bro , quite useful!!
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Jan 02, 201113Year Member
Posts: 1,610
Reputation Power: 75
Status: Offline
Joined: Jan 02, 201113Year Member
Posts: 1,610
Reputation Power: 75
Add pictures, its impossible to follow a tutorial with no pictures.
And most everything you posted is common sense. Make a tutorial about something new, and not an extremely undetailed version of a tutorial that has been posted hundreds of times.
Last edited by Uncertainty ; edited 1 time in total
And most everything you posted is common sense. Make a tutorial about something new, and not an extremely undetailed version of a tutorial that has been posted hundreds of times.
Last edited by Uncertainty ; edited 1 time in total
- 0useful
- 1not useful
#4. Posted:
Status: Offline
Joined: May 01, 201113Year Member
Posts: 784
Reputation Power: 32
What will the wattage be on the soldering iron man?
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.