[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]

Motherboard
---Xenon Jtag
---Zephyr Jtag/RGH1/RGH2
---Falcon Jtag/RGH1/RGH2
---Jasper Jtag/RGH1/RGH2
---Trinity RGH (minimal mode may not work)

NAND
---16MB
---64MB

===================Flexible Systemroot Patches==========================
(hard drive free installs!)

We have added a new feature to replace the E90 error that gets thrown when the hard drive is missing or files have been misnamed.
If any errors occur during its attempt to remap systemroot to the hard drive (wrong folder name, hdd unplugged, etc..) it will boot into
minimal NAND only mode where the devkit launcher dashboard will still boot.

This means that a hard drive is not neccesary to run RGLoader! This also means that you can just flash the image on and use minimal mode to copy
and setup the hard drive files for the full installation using xbox neighborhood.

It is not recommended to use the minimal mode, but it does work. It won't do things like load the metro dashboard. This is one way to detect if your in minimal mode or not. We will add an indicator in a future update.
================================================================


=============JTAG BETA RELEASE - All but big block jasper =====================

When building a jtag image, it is best to supply an already jtagged NAND. This way any customizations
to your SMC will be kept and also if your crc does not match it will not matter. (this will not be neccesary in final release)
NOTE: When an already patched SMC is supplied, the builder will say (unable to patch). Just ignore this.

XELL HAS BEEN ADDED TO JTAG IMAGES!
=============================================================

=====================DUMMY KV Generation===========================
To protect you from getting your keyvaults banned, we have added an option to options.ini for creating a
temporary dummy KV. This sometimes introduces a lag when going to the dashboard and some xex caused by the
xbox live connection timeout. If this annoys you, just disable it in options.ini and we will get it fixed soon.
==============================================================


RGH2 Support has been added! Big thanks to Team-Xecuter for their research and work.

Dynamic patches have been added! Use options.ini to configure extra patches like NOFCRT or NOMU.

Big thanks to team-xecuter & xconsoles for donating a xenon jtag! Would not have been possible without this.

This builder still does not support big block jaspers. I know this sucks for a lot of jtags, so we will try to get this out ASAP.


---Things to come---
Jtag patch compiling at build time
Big block support.
hvxbootOS
much more...

\_____________|- RGLoader Runtime Patcher -|________________/

Features
-----------------
Adds extra patches for xam or any other exe/dll in memory. Gives more runtime access and control on patches. Loads rgloader.ini from the
hard drive root and also flash drive root.

Block_Live_Dns = Blocks xbox live DNS so you can't "phone home"
Map_USB_Mass = Makes all usb devices show up in xbox neighborhood
Default_Dashboard = Sets the default dashboard

Usage
-----------------
Configure and place rgloader.ini onto the root of your hard drive (Partition 1), or usb thumb drive.
Reboot.


\_____________________|- Usage -|________________________/

AS OF 0v99 YOU NEED TO PROVIDE THE FILESYSTEM FILES --

Download a filesystem package and extract it into the same folder as this builder (merging filesystems and loaders)

Slims require fcrt.bin to play retail DVDs.
-----------------------------------------------------

You will need .NET Framework 4 installed. May work with Mono.

Create a folder 'Filesystems' (don't forget the 's') on the xbox hard drive.
(This is where you will store the devkit system files since they won't all fit on a 16MB retail NAND.)

Copy the devkit files to a folder '14699-dev' (or 14719-dev for ver.14719) inside of 'Filesystems' on the HDD.
ie: hdd:/Filesystems/14699-dev

Put your nand next to the builder and name it "nand.bin".

Open the RGBuild Launcher and type in your CPU_Key and select your build options.

Click "RGBuilder" button to start the process.

Output will be next to this file named: Image._____.bin


----------- Prototype NAND Image Editor -----------
Click "Image Editor" button in the launcher, or run rgbuild.exe /ui to open the rgbuild UI, which is a prototype NAND image editor similar to 360 flash tool. The GUI is still in beta, but should be very functional. Please reports bugs to #rgloader!


\_____________________|- Known Bugs -|________________________/

-Occasionally slims/trinitys will freeze or reboot on the first boot attempt after a reflash.
This usually only happens the first time, if ever.

-Some slims won't boot into minimal mode.

-Slims require fcrt for retail dvds to run.


\_____________________|- Changelog -|_________________________/

0v295
-Fixed falcon rgh1 issue in 0v290
-Added kernel side patch loader
-Added INI: hdd1:\RGLoader.ini
-Block live dns option
-Add USB drives to xbox neighborhood (thanks Natelx!)
-Assign default dashboard
-Fixed dummy KV induced sign on lag
-MUCH Faster boot speeds (by 4-5 seconds! 9.5 second jtag load)

0v290
-Fixed RGH2
-Added flexible systemroot patches! (no hdd needed!)
-Added xell to jtag images
-Fixed ini problems
-Slightly faster phat boot times

0v280
-Fixed slim CBB pairing data issue
-Added dynamic patches, check out options.ini [Patches]
-Prettied up patch code (thanks for macros.S cOz!)
-New GUI Update via m0j0j0_j0
-Systemroot patches are now optional (dynamic)
-Added custom error code e90! (hdd filesystem failure)
-Fixed HDMI jtags
-Added RGH2 support! (thanks Team Xecuter)

0v260
-Added better error handling on patch compiling
-MUCH faster compile times
-Added GUI launcher (thanks m0j0j0_j0!)
-GUI Launcher settings save to options.ini
-Xenon jtag 14719 fixed

0v255
-Fixed 14719 dash issue
-Fixed 14719 retail xex issue
-Fixed KV editing in GUI
-Added dummy KV generating (thanks cOz!)
-Added option to generate KV in options.ini
-Patched xbdm to always be dev, instead of xbdm.ini (thanks Natelx!)

0v240
-Integrated bat files into rgbuild.exe
-Fixed jasper issue
-Added options.ini
-Lots of changes to builder, mostly internal
-Missing filesystem files will now be ignored (dae, fcrt, etc..)
-Changed selection menu
-Auto detects console using smc (thanks cOz!)
-Fixed CF/CG bug (can now use them in GUI)
-Support for JTAG images
-Changed selection menu layout
-Builder now ignores missing filesystem files instead of locking up
-Added 14719
-Support for trinity 14719 source images
-Updated xell binary to v0.991
-Added icons to builder (thanks m0j0j0_j0!)
-Fixed xell binary size issue
-Added option for compiling phat CD to options.ini
-Fixed issue with KV editing not saving

0v170
-Added KV editing to the GUI
-Xell dual boot (xell-gggggg.bin)
-Bad block support
-Added font files to nand image to fix fsd (thanks cOz)
-No need to run image through nandpro anymore
-More error handling, builder doesn't say successful build every time

0v100
-Added 14699 patches
-Moved files location on hdd
-Slims show up as dev kit on 14699 without xbdm.ini or modded xbdm.xex
-Retail disc support on slims
-Added neededfiles.txt to the folders

Part 1
Part 2

Team RGLoader

Changelog from tortuga cove:

RGLoader-dev Group

tydye81
stoker25

Deathlok
RF1911
spandaman
Juggahax0r
Evil0ne
XDK
Mustache
iCEQB
m0j0j0_j0

----------------------------------------------------
Testers/Helpers/#RGLoader regulars

Ameel
Grim187
Rumblpak
iLLNESS
Xumpy
ddxcb
Gadorach
no1b4me
Mycah
Alter
_nitram
PizzaG

--> RGLoader 295 [ Register or Signin to view external links. ]
-->14719 Filesystem Package [ Register or Signin to view external links. ]
-->14699 Filesystem Package[url]Adding Tomorrow Going Bed
[/url]

Extract your folders and they should look like this
[ Register or Signin to view external links. ]

Click on the Filesystems Folder, and drag the files from the Filesystems you downloaded and drag them over to the GUI folder.
[ Register or Signin to view external links. ]

Do the same thing for the Bootloader folders that you download in the 14719 Filesystems. Drag them from the right, into the corresponding folders on the left. Making sure you have all theses files in you gui folder will be what makes your image build, or fail building.
[ Register or Signin to view external links. ]

Place your ORIGINAL NAND in your RGLoader folder like so.(If you are RGloading a xenon jtag use your freeboot image and rename it to nand.bin)

[ Register or Signin to view external links. ]

Type in your cpu key, and Click "RGH Builder"

[ Register or Signin to view external links. ]


Click
[ Register or Signin to view external links. ]



Once you click a command prompt window will open, and run RGBuilder. If all of the necessary bootloaders and filesystems are in place. It will build you image like so.

[ Register or Signin to view external links. ]
[ Register or Signin to view external links. ]


You should see a file like this in the root of your RGLoader folder.Once we preload our hdd with the necessary files we will write this to our console, via manual flash, or through xell reloaded (via nandflash.bin ).

[ Register or Signin to view external links. ]

In the Filesystem Pack you downloaded, Inside of the HDD-Filesystems, you will see "14719-Dev". (If you are using 14699 or 13599 use those files.

[ Register or Signin to view external links. ]



Next Create a folder named "Filesystems" <<<< Make sure it is exactly like that. Drag the 14719-Dev folder into the Filesystems folder you just created.

[ Register or Signin to view external links. ]



Next put the "Filesystems" folder on a usb, and copy it to the root of your xbox 360 hdd, via xex menu. (If you honestly can't figure out how to do that part, PM me.)

Rename file created to Nandflash.bin, put your nandflash.bin and xenon.elf on a usb.

{Xenon.elf download}{Rawflash}
[ Register or Signin to view external links. ]



Plug the USB with both files, and boot xell reloaded. This will write the image you created to your console. If you have made the image with the correct CPU key and have the files placed correctly, your RGH will boot to a dev recovery.

(I'm almost positive you can write your nand with rawflash, if not please correct me. Those who have a nandflasher, you can most certainly write it via nandpro, or other GUI that offers nand read/write.}

[ Register or Signin to view external links. ]