vXEraseXv wrote 1.What motherboard :Falcon
2.RGH or Jtag : Jtag
3. What seems to be the problem ?Won't boot up but lights and fan comes on
4. What physical errors are you seeing:Black screen on boot.
5. Do you have your OG Nand ? Unsure

I have been told its a GPU Failure or RROD

Have you flashed anything to it before

1.What motherboard:

Falcon

2.RGH or Jtag:

RGH


3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)

Today when I went to turn on my RGH'ed falcon it took longer than usual to glitch. Once it finally did start to boot up it made a beep at the xbox 360 logo and then froze. I turned it back off and tried again but I cant get it to boot. I have had it trying to boot for a while now and still nothing. I checked all the wires and they look okay but I am no expert on soldering so im not sure. Any help would be appreciated!

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

RGH not booting

5. Do you have your OG Nand ?

Yes

CTE wrote 1.What motherboard:

Falcon

2.RGH or Jtag:

RGH


3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)

Today when I went to turn on my RGH'ed falcon it took longer than usual to glitch. Once it finally did start to boot up it made a beep at the xbox 360 logo and then froze. I turned it back off and tried again but I cant get it to boot. I have had it trying to boot for a while now and still nothing. I checked all the wires and they look okay but I am no expert on soldering so im not sure. Any help would be appreciated!

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

RGH not booting

5. Do you have your OG Nand ?

Yes

probably a short on pll bypass.

flash back to stock and see if it boots retail

-Mafia5K- wrote

CTE wrote 1.What motherboard:

Falcon

2.RGH or Jtag:

RGH


3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)

Today when I went to turn on my RGH'ed falcon it took longer than usual to glitch. Once it finally did start to boot up it made a beep at the xbox 360 logo and then froze. I turned it back off and tried again but I cant get it to boot. I have had it trying to boot for a while now and still nothing. I checked all the wires and they look okay but I am no expert on soldering so im not sure. Any help would be appreciated!

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

RGH not booting

5. Do you have your OG Nand ?

Yes

probably a short on pll bypass.

flash back to stock and see if it boots retail

How am I suppose to reflash it if xell wont boot though?

CTE wrote

-Mafia5K- wrote

CTE wrote 1.What motherboard:

Falcon

2.RGH or Jtag:

RGH


3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)

Today when I went to turn on my RGH'ed falcon it took longer than usual to glitch. Once it finally did start to boot up it made a beep at the xbox 360 logo and then froze. I turned it back off and tried again but I cant get it to boot. I have had it trying to boot for a while now and still nothing. I checked all the wires and they look okay but I am no expert on soldering so im not sure. Any help would be appreciated!

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

RGH not booting

5. Do you have your OG Nand ?

Yes

probably a short on pll bypass.

flash back to stock and see if it boots retail

How am I suppose to reflash it if xell wont boot though?

From what I can make out of here, is that your console has RROD, once the ORIG nand is flashed back, you would be able to see the red rings, you need to have your xbox repaired, PM me mafia boss or dvdmeece if you're looking to have a console repaired'

Carlooch wrote

CTE wrote

-Mafia5K- wrote

CTE wrote 1.What motherboard:

Falcon

2.RGH or Jtag:

RGH


3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)

Today when I went to turn on my RGH'ed falcon it took longer than usual to glitch. Once it finally did start to boot up it made a beep at the xbox 360 logo and then froze. I turned it back off and tried again but I cant get it to boot. I have had it trying to boot for a while now and still nothing. I checked all the wires and they look okay but I am no expert on soldering so im not sure. Any help would be appreciated!

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

RGH not booting

5. Do you have your OG Nand ?

Yes

probably a short on pll bypass.

flash back to stock and see if it boots retail

How am I suppose to reflash it if xell wont boot though?

From what I can make out of here, is that your console has RROD, once the ORIG nand is flashed back, you would be able to see the red rings, you need to have your xbox repaired, PM me mafia boss or dvdmeece if you're looking to have a console repaired'

I was messing with it earlier and got it to boot once, but then I shut it off and tried again and couldnt get it to do it. If it was rrod wouldnt that mean that it wouldnt boot at all?

1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) wireless controller wont connect to RGH. Tried many things but still wont work.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) No physical errors
5. Do you have your OG Nand ? I dont think
So( i bought it from dvdmeece )

TTG_Ghosted98 wrote 1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) wireless controller wont connect to RGH. Tried many things but still wont work.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) No physical errors
5. Do you have your OG Nand ? I dont think
So( i bought it from dvdmeece )

try building a new rgh image and flash it with rawflashv4 from usb

-Mafia5K- wrote

TTG_Ghosted98 wrote 1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) wireless controller wont connect to RGH. Tried many things but still wont work.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) No physical errors
5. Do you have your OG Nand ? I dont think
So( i bought it from dvdmeece )

try building a new rgh image and flash it with rawflashv4 from usb

Is there a tutorial and how to do this?
Thanks

This looks like a great thread, and I shall be using it soon since I just got my friend's old JTag (Hasn't been on xbox live in about a year) so I'm sure I will be posting here asking some questions if I screw up