CTE wrote

Carlooch wrote

CTE wrote

-Mafia5K- wrote

CTE wrote 1.What motherboard:

Falcon

2.RGH or Jtag:

RGH


3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)

Today when I went to turn on my RGH'ed falcon it took longer than usual to glitch. Once it finally did start to boot up it made a beep at the xbox 360 logo and then froze. I turned it back off and tried again but I cant get it to boot. I have had it trying to boot for a while now and still nothing. I checked all the wires and they look okay but I am no expert on soldering so im not sure. Any help would be appreciated!

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

RGH not booting

5. Do you have your OG Nand ?

Yes

probably a short on pll bypass.

flash back to stock and see if it boots retail

How am I suppose to reflash it if xell wont boot though?

From what I can make out of here, is that your console has RROD, once the ORIG nand is flashed back, you would be able to see the red rings, you need to have your xbox repaired, PM me mafia boss or dvdmeece if you're looking to have a console repaired'

I was messing with it earlier and got it to boot once, but then I shut it off and tried again and couldnt get it to do it. If it was rrod wouldnt that mean that it wouldnt boot at all?

After many hours of trial and error I now know whats wrong, the orange wire was junk and was not allowing the current to flow through so I soldered another wire on to it, touched the mobo to where it should be on the other end and after a few positioning it booted up! Thanks mafia, you were right Also thanks seaeye!

1.What motherboard? Trinity
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) I have a dual nand trinity. I updated the stock nand from 15572 dash to the 15574 dash. The stock nand still works fine but now the glitched nand loads up xell
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) Xell loading on glitched nand
5. Do you have your OG Nand ? No

update your LDV on your rgh nand

What motherboard? Jasper
RGH or Jtag? Jtag
What seems to be the problem ? not booting up
What physical errors are you seeing?power turns on but won't boot
Do you have your OG Nand ? Yes

vXEraseXv wrote What motherboard? Jasper
RGH or Jtag? Jtag
What seems to be the problem ? not booting up
What physical errors are you seeing?power turns on but won't boot
Do you have your OG Nand ? Yes

Have you tried to update, or flash a new image to your Jtag recently ?

how do you get your original nand for a RGH?

Carlooch wrote

vXEraseXv wrote What motherboard? Jasper
RGH or Jtag? Jtag
What seems to be the problem ? not booting up
What physical errors are you seeing?power turns on but won't boot
Do you have your OG Nand ? Yes

Have you tried to update, or flash a new image to your Jtag recently ?

No not done anything apart from put in a iso disc.

1.What motherboard: Zephyr
2.RGH or Jtag: RGH
3. What seems to be the problem: When I go to boot the console it goes 3 red rings and the console doesn't boot. I have recently to flash a new image because I was trying to turn it into a dev recovery
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc: 2/3 RROD
5. Do you have your OG Nand ? Yes I do

mrcracker0101 wrote 1.What motherboard: Zephyr
2.RGH or Jtag: RGH
3. What seems to be the problem: When I go to boot the console it goes 3 red rings and the console doesn't boot. I have recently to flash a new image because I was trying to turn it into a dev recovery
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc: 2/3 RROD
5. Do you have your OG Nand ? Yes I do

Can you boot into xell if you can reflash your nand through there and that will fix it

BoSsLoBbYz wrote

mrcracker0101 wrote 1.What motherboard: Zephyr
2.RGH or Jtag: RGH
3. What seems to be the problem: When I go to boot the console it goes 3 red rings and the console doesn't boot. I have recently to flash a new image because I was trying to turn it into a dev recovery
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc: 2/3 RROD
5. Do you have your OG Nand ? Yes I do

Can you boot into xell if you can reflash your nand through there and that will fix it

It doesn't let me boot into xell, It does the same thing. Doesn't boot and goes 3 red rings