You are viewing our Forum Archives. To view or take place in current topics click here.
jtag need help! (rrod)
Posted:
jtag need help! (rrod)Posted:
Status: Offline
Joined: Feb 25, 201113Year Member
Posts: 342
Reputation Power: 13
Status: Offline
Joined: Feb 25, 201113Year Member
Posts: 342
Reputation Power: 13
ok, so i got red rings on my jtag, and the secondary error code is 0102. i have looked it up on google and tried for a while but could not find anything. please help!!!
#2. Posted:
Status: Offline
Joined: Sep 19, 201014Year Member
Posts: 8,159
Reputation Power: 394
Status: Offline
Joined: Sep 19, 201014Year Member
Posts: 8,159
Reputation Power: 394
0102 See Error E18
E18: Error in the "Digital Backbone" (CPU/GPU/RAM), this is usually caused by a cold solder joint between the GPU and the mainboard.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced.
[ Register or Signin to view external links. ]
That's your problem and somewhat solution.
E18: Error in the "Digital Backbone" (CPU/GPU/RAM), this is usually caused by a cold solder joint between the GPU and the mainboard.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced.
[ Register or Signin to view external links. ]
That's your problem and somewhat solution.
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Feb 25, 201113Year Member
Posts: 342
Reputation Power: 13
Status: Offline
Joined: Feb 25, 201113Year Member
Posts: 342
Reputation Power: 13
ok. thanks man. also, the mother board is a xenon and which is better? just to take it apart completely or do the towel trick?
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Sep 19, 201014Year Member
Posts: 8,159
Reputation Power: 394
Status: Offline
Joined: Sep 19, 201014Year Member
Posts: 8,159
Reputation Power: 394
coolface wrote ok. thanks man. also, the mother board is a xenon and which is better? just to take it apart completely or do the towel trick?
Don't do anything with towels, never.
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.