mrcracker0101 wrote

BoSsLoBbYz wrote

mrcracker0101 wrote 1.What motherboard: Zephyr
2.RGH or Jtag: RGH
3. What seems to be the problem: When I go to boot the console it goes 3 red rings and the console doesn't boot. I have recently to flash a new image because I was trying to turn it into a dev recovery
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc: 2/3 RROD
5. Do you have your OG Nand ? Yes I do

Can you boot into xell if you can reflash your nand through there and that will fix it

It doesn't let me boot into xell, It does the same thing. Doesn't boot and goes 3 red rings

you are going to need to send it in for a manual reflash

1. motherboard trinity/vahalla?
2.RGH or jtag:rgh
3.What seems to be the problem: The console cuts itself on and off, somtimes i get to play for an hour sometimes less than an minute. Whenever it cuts itself of it comes right back on but doesnt boot. I swapped the board with the ring of light and the front panel that has the ribbon cable but still no luck.
4.I have the original nand on a cd

1.What motherboard? Xenon
2.RGH or Jtag? Jtag
3. What seems to be the problem? Whenever I flash rgloader and reboot my console, I get a black screen and I've waited for serveral minutes and the boot animation never starts. I'm able to go back to the old dashboard by reflashing an old nand but it's not the original. I really want to use RGLoader, is there any thing you can suggest that I can do to make this work.
4. What physical errors are you seeing? Black Screen, the xbox ROL board turns on but never spins like it would on a normal dashboard.
5. Do you have your OG Nand? no

Repairs wrote Hey im having trouble installing this JR-Programmer i just got, My Nand-x broke but anyways i plug it in and it just makes not the normal sound when you plug something into the usb and the drivers wont install and i cant use it, please help

you must install yoru drivers manually same as a nandx it wont do it on its own like some devices.

1.What motherboard: Xenon
2.RGH or Jtag: Jtag
3. What seems to be the problem: I get an error when trying to build a freeboot image. I'm using jtag tool and when i try to check my cb and kv type it says error checking kv. I've made sure i have the proper cpu key and all that. i just need to be able to create a freeboot image so if any of you could, i'd give you my cpu key and original nand if you'll be able to create the freeboot image and then give it to me in a download link.
4.Name anything recent that you have done to you console recently (update nands, etc): wrote xell and works perfectly.
5.. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) none
6.. Do you have your OG Nand yes

-Buckeyes- wrote 1.What motherboard: Xenon
2.RGH or Jtag: Jtag
3. What seems to be the problem: I get an error when trying to build a freeboot image. I'm using jtag tool and when i try to check my cb and kv type it says error checking kv. I've made sure i have the proper cpu key and all that. i just need to be able to create a freeboot image so if any of you could, i'd give you my cpu key and original nand if you'll be able to create the freeboot image and then give it to me in a download link.
4.Name anything recent that you have done to you console recently (update nands, etc): wrote xell and works perfectly.
5.. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) none
6.. Do you have your OG Nand yes

Eh. Go download jrunner over at team xecuter. Jtag tool was good right when rgh came out, but not up to date anymore

Yea i still have the same error it says "error checking kv"

I have a RGH 2.0 Falcon xbox and when i attempt to boot xell my coolrunner rev c just flashes. I heard you can put resistors and caps. What should I do?

-Buckeyes- wrote Yea i still have the same error it says "error checking kv"

do you have any other nand dumps, nandflashs, updflash.bin anything ?

SuperControllerz wrote I have a RGH 2.0 Falcon xbox and when i attempt to boot xell my coolrunner rev c just flashes. I heard you can put resistors and caps. What should I do?

can we see some pictures of you installation ?