lol your funny that you need our help

blackbird431 wrote just look on youtube to fix it there are a hundred videos to fix it i had rrod and fixed it no problem mine is working 10 times better now
go out and buy the things to fix your xbox

I have a rework station and all the equipment a man would ever need its just these two consoles being stubborn after reflowing GPU, CPU, and RAM chips.

hahahahahahahahahaha

Is there someone on here that knows what they are talking about?

hopefully you fix it

0022 See Error E10

E10: Unconfirmed: CPU error, generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints). This can also be triggered by an error with the TSOP.

Are you SURE your CPU is properly soldered and it's solid?

Or here's a different site with more info:

1)If you soldered anything to the mainboard before it occured, whatever you are powering from this point is drawing too much power so get rid of it.Also get rid of everything that you can see that might bridge anything near the GPU.
2) X-Clamp replacement
3) Reflow GPU and HANA chip
4) If it\'s not the GPU/(H)ANA, it might in rare cases be the CPU and can be fixed by reflowing the CPU.
5) if you flash with xell on JTAG-fixed xbox360 this will appear, flash back to original.
6) also can be caused by a broken trace (see link below).

[ Register or Signin to view external links. ]

blackbird431 wrote [ Register or Signin to view external links. ]
this is a link to fix 0022 error dont know if it will work for you i just found this and maybe you can try

iSamXD wrote

blackbird431 wrote just look on youtube to fix it there are a hundred videos to fix it i had rrod and fixed it no problem mine is working 10 times better now
go out and buy the things to fix your xbox

I have a rework station and all the equipment a man would ever need its just these two consoles being stubborn after reflowing GPU, CPU, and RAM chips.

-.- Really... if you don't know hat you're talking about, don't try to help people.

inuyasha555 wrote 0022 See Error E10

E10: Unconfirmed: CPU error, generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints). This can also be triggered by an error with the TSOP.

Are you SURE your CPU is properly soldered and it's solid?

Or here's a different site with more info:

1)If you soldered anything to the mainboard before it occured, whatever you are powering from this point is drawing too much power so get rid of it.Also get rid of everything that you can see that might bridge anything near the GPU.
2) X-Clamp replacement
3) Reflow GPU and HANA chip
4) If it\'s not the GPU/(H)ANA, it might in rare cases be the CPU and can be fixed by reflowing the CPU.
5) if you flash with xell on JTAG-fixed xbox360 this will appear, flash back to original.
6) also can be caused by a broken trace (see link below).

[ Register or Signin to view external links. ]

Think i should try another CPU reflow?

UPDATE: Whilst booting the retail without heatsinks it instantly goes 0002 which is CPU so tomorrow i will reflow CPU on retail and see how it goes but as for the JTAG im stumped haha