You are viewing our Forum Archives. To view or take place in current topics click here.
Problem with flashing, need help fast!
Posted:
Problem with flashing, need help fast!Posted:
Status: Offline
Joined: May 08, 201014Year Member
Posts: 172
Reputation Power: 6
Status: Offline
Joined: May 08, 201014Year Member
Posts: 172
Reputation Power: 6
Well today my brother and I were flashing a Lite-On 16-d2s drive. We are using a home made probe and it all works. We get to the phat key part and we probe it. It works and goes to the part where you have to disconnect for 5 seconds and reconnect. it completes. it lets me say the Key.bin and the Inquire.bin. but after that it says " Secret command return error." we have tried multiple times and it still wont work. if anyone could help then much appreciated!!
#2. Posted:
Status: Offline
Joined: Oct 30, 201212Year Member
Posts: 27
Reputation Power: 1
#3. Posted:
Status: Offline
Joined: Oct 30, 201212Year Member
Posts: 27
Reputation Power: 1
Read this;
This is straight from the JF tutorial: "Using xbox360 to power the drive: If using a 360 to power the drive this method can be tricky to accomplish. You need to power on the drive with Eject status closed but Tray Half Open To do this using an Xbox 360 as Power source, eject the DVD drive, then, press eject to close the tray. Now this
is the important part you MUST remove the DVD power plug (the black cable with white plug on back of DVD-ROM) from the DVD Drive BEFORE it closes fully. Wait for a few seconds and replace the power plug into the DVD drive taking extreme caution to plug the plug the right way around once done, the drive is now powered, console thinks its
closed but it is in fact half open." Did you do this exactly?
It will then ask you to move drive tray to open posistion.
"DO NOT POWER CYCLE THE DRIVE AT THIS STAGE; DOING SO WILL
RESULT IN A BAD/FAILED DUMP!!!!
***Make sure you don't power cycle***
Eject the drive (so it is fully open) OR manually move the tray fully open by hand! Once tray is fully ejected, click OK If the dump appears to JungleFlasher that it was valid, JungleFlasher will prompt you to save, but look for this in the log: (with Your key!)
Credit to JAWS
This is straight from the JF tutorial: "Using xbox360 to power the drive: If using a 360 to power the drive this method can be tricky to accomplish. You need to power on the drive with Eject status closed but Tray Half Open To do this using an Xbox 360 as Power source, eject the DVD drive, then, press eject to close the tray. Now this
is the important part you MUST remove the DVD power plug (the black cable with white plug on back of DVD-ROM) from the DVD Drive BEFORE it closes fully. Wait for a few seconds and replace the power plug into the DVD drive taking extreme caution to plug the plug the right way around once done, the drive is now powered, console thinks its
closed but it is in fact half open." Did you do this exactly?
It will then ask you to move drive tray to open posistion.
"DO NOT POWER CYCLE THE DRIVE AT THIS STAGE; DOING SO WILL
RESULT IN A BAD/FAILED DUMP!!!!
***Make sure you don't power cycle***
Eject the drive (so it is fully open) OR manually move the tray fully open by hand! Once tray is fully ejected, click OK If the dump appears to JungleFlasher that it was valid, JungleFlasher will prompt you to save, but look for this in the log: (with Your key!)
Credit to JAWS
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.