1.What motherboard falcon
2.RGH or Jtag none
3. What seems to be the problem ?.= it dos not turn on i opened it and found a brown thing its little
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) not turning on
5. Do you have your OG Nand ? no

okay so earlier today I decided to convert my Jtag to a Xdk using this tutorial thetechgame.com/Forums/t=3653176...overy.html ..(but I used Rgloader v3.5 for dash 15574) The nand installed just fine and I had Rgloader installed.. But I then decided to install dash launch 3.04, it started to install patches and then rebooted. The jtag turned on but nothing happend. I then booted of the console via Dvd key and again it turned on but nothing happend . No xell_reloded or Dashboard.

Jtag type: Xenon
Kernel: Dash 15574 (Dev kernel)

I jtaged the console myself and I was wondering how to fix this can I redump the nand via Lpt port again or is it 'Dead' ????

Any other suggestions would be great, Thank you in advance.

can you direct me to a trusted jtag seller. im in the uk.

TheUksRealMcCoy wrote can you direct me to a trusted jtag seller. im in the uk.

go to the Market place forum and look through the sticky's, they are all trusted sellers there

Xenon

Jtag

DVD drive reads games as movies and when i click play it shows the menu type thing it would show when u play a movie and says XBOX360

Yes i got the Nand

Also have a Flash Drive, as well as Nand-X

Jasper
RGH
Problem: I cant system link multiplayer
Info: So i can system link between my RGH and retail for system link zombies on WaW but when i try doing it on multiplier it dosent work and this is the same for MW2 as well?
I've also got them both on same tu, my Rgh is linked to router via Ethernet however my retail is wireless could this be the problem?

Motherboard: Falcon

Trying to RGH1

I got everything to the point when I'm suppose to boot to xell, but it never glitches, coolrunners green light keeps flashing but it never glitches, left it on for like an hour, nada. So not booting to xell. Up to that point everything went well no errors in writing the ecc file etc.

I'm using 30awg kynar wire for the STBY_CLK wire instead of the one that came with coolrunner. Is that a problem? Also the one end shield is not soldered to the ground in the CPU_RST shielded wire, because I read somewhere that it could affect negatively for the boot. Is this true? Or could this also be part of the problem?

Thanks for all the help.

Oh and I did use the original wiring first but because had the same problems I started to experiment with other wires.

Zeqo69 wrote Motherboard: Falcon

Trying to RGH1

I got everything to the point when I'm suppose to boot to xell, but it never glitches, coolrunners green light keeps flashing but it never glitches, left it on for like an hour, nada. So not booting to xell. Up to that point everything went well no errors in writing the ecc file etc.

I'm using 30awg kynar wire for the STBY_CLK wire instead of the one that came with coolrunner. Is that a problem? Also the one end shield is not soldered to the ground in the CPU_RST shielded wire, because I read somewhere that it could affect negatively for the boot. Is this true? Or could this also be part of the problem?

Thanks for all the help.

Oh and I did use the original wiring first but because had the same problems I started to experiment with other wires.

Honestly i never got a console to work when grounding the sheild. I recommend just using the regular blue wire that comes with it. RGH1 should be fine with out the low loss sheilded cable.

1.What MotherBoard: Xenon
2.RGH or Jtag: JTAG
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc):
I recently updated to the latest dash after having my jtag lie around for 2 years.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc):
It worked fine and i tested system link but after shutdown it is now stuck on the loading screen (the big X with Xbox 360 underneath).
5. Do you have your OG Nan: Yes (well only my CD key)

Edit: Fixed - Re-flashed through xellous

1.What motherboard: jasper
2.RGH or Jtag: jtag
3. What seems to be the problem ?: wont boot and power unit light turns red when i press the power button on console
4. What physical errors are you seeing?: just wont boot and the power unit light goes red
5. Do you have your OG Nand ? yes