1.What motherboard- Xexon

2.RGH or Jtag- JTAG

3. What seems to be the problem?- I can't play or download black ops on my JTAG. All other games work perfectly fine and I have tried copying it thought FSD, and xex menu and just playing it normal from the dashboard. I have tried multiple disks, including a brand new one and they work on my other consoles. It just says Play DVD on the dashboard and if I select it then it just gives me the Xbox logo. Any suggestions?

4. What physical errors are you seeing?- None. Just the fact that it says play DVD.

5. Do you have your OG Nand ? yes

Console: Trinity
RGH: 2.0
Demon Installed
CR3 Pro Installed
Original Nand Backups with CPU + DVD Key

Issue: I soldered a double shielded cable for slim I purchased from TX recommended seller, to improve glitch/boot time. However the weight of the cable, must have generated enough pressure to remove the CPU_RST (D) Pad on my CR3 Pro.

I have researched for alternative points online, checked TX forums, however they only have a guide for Coolrunner rev c. I also cannot establish or find a trace coming from the (D) pad to anywhere on the board.

If someone would kindly check with a multimeter for alternative points for CPU_RST on CR3 Pro board, I would really appreciate your help.

I can only find one trace, coming from above the CPU_RST (D) Pad, and this seems to be connected to the C10 resistor pad and linked to one of the points on the CR3 chip.

I would really appreciate any help I can get with this, as I have been looking for a solution for this all day.

Thanks

1.What motherboard (Xenon)
2.RGH or Jtag (Jtag)
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) Haven't updated in a while... re installed mw2
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)(When i load the mw2 tu8 i get disc unreadable or fetal crash intercepted, i tried reinstalling mw2 but nothing is working)
5. Do you have your OG Nand ? (NO)

Motherboard: Trinity
Console: Dual nand RGH (RGH 2.0)
Dashboard: Current

I want to update the retail nand but leave the RGH'ed nand on the dashboard its at. When a new dashboard comes out can I just sign into XBL on the retail nand and update it without effecting the RGH nand?

Rgh or jtag? And what is the difference and wich is cheaper

Danimals wrote 1.What motherboard-Falcon

2.RGH or Jtag-RGH

3. What seems to be the problem?- I flashed my nand to it trying to update it and it has bad blocks in it.

4. What physical errors are you seeing?-1 red light and E71

5. Do you have your OG Nand ? yes

XD I can answer that, Flash your og nand back to it, Is it getting e71 or xmas lights?

1.What motherboard : Falcon
2.RGH or Jtag: RGH2
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) I havent done anything to the console but for some reason when I try to turn it on it makes a LOUD noise and the screen is blank, it has only turned on twice and wont boot for some reason.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc): The RGH is not booting niether is it showing anythig on screen
5. Do you have your OG Nand ?: Yes

5KMods wrote

OriginallyMark wrote

OriginallyMark wrote 1.What motherboard Xenon

2.RGH or Jtag Jtag

3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) Cannot sync wired controllers? Dont know the problem

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) No RROD Etc, just no wired controller sync, it connects in xell though :/

5. Do you have your OG Nand ? Nope. seller didnt give it to me

Still got the same problem and its been a few months, please someone help!

It boots to dashboard?

Have you written your original nand back to the console to confirm its fucntioning as stock?

Dont have the og nand as brought the console second hand, and yep boots fine, wireless controllers sync perfectly but wired ones just dont sync, please help!

1.What motherboard/ jasper

2.RGH or Jtag/ jtag

3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)/ center led lights up controllers wont sync and tv says no signal I think its a bad flash

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) I guess this would go under bopt booting?

5. Do you have your OG Nand ?/ yes

never mind that was dumb didn't think of xell

awesome topic bro.

You really helped me out with identifing

What was wrong with my JTAG , Thanks


Purchaseing new RGH Soon