HOW TO FLASH YOUR NEW UPGRADE IMAGE TO XBOX 360

THIS IS THE SAME PROCESS IF YOUR FLASHING A NEW UPDATE OR A NEW KV FILE
BUT IF UPDATING DASH YOU MAY WANT TO CHOOSE TO KEEP ORGINAL KV FILES
PLEASE ALWAYS DO A BACKUP OF NAND FILE FIRST AS GIVEN BELOW
THIS WILL HELP IF YOU BRICK YOUR CONSOLE

***** DISCONNECT INTERNET FROM XBOX 360 NO0 MATER WHAT ******

START XBOX AND OPEN XEXMENU
PRESS LB ON CONTROLLER TWICE
THEN SELECT FLASH360.XEX AND PRESS A
PRESS X THEN A TO BACKUP EXISTING NAND FLASH
ONCE 100% PRESS ANY BUTTON (NOT BACK) AND THEN PRESS BACK

****** THERE SHOULD NOW BE AN EXTRA FILE ON YOUR USB STICK CONFIRM BEFORE CONT
IF THERE ISNT ANOTHER FILE THEN REPEAT

RESELECT FLASH360.XEX
PRESS A TO WRITE NAND FLASH
PRESS B TO NOT KEEP EXISTING KV FILES

****** A WARNING WILL APPEAR
IF YOU ARE 100% SURE YOUR BACKUP WAS THERE THEN CONTINUE
PRESS START THEN A TO CONTINUE WITH FLASH
ONCE 100% PRESSANY BUTTON (NOT BACK)
THEN PRESS BACK TO EXIT AND REBOOT - SHOULD COUNT DOWN AND TURN OFF XBOX

****** DO NOT TURN OFF OR EXIT TO DASHBOARD UNDER ANY OTHER MEANS
ALWAYS PRESS THE BACK BUTTON AS GIVEN ABOVE

ONCE CONSOLE HAS REBOOT YOU CAN SET UP YOUR NORMAL SETTINGS IF NEEDED
GOTO SYSTEM SETTINGS AREA AND THE SERIAL NUMBER SHOULD HAVE CHANGED
NOW ONCE YOUR READY YOU CAN GO BACK ONLINE UNTIL NEXT BAN



PLEASE SAY THANK YOU IF THIS HELPS AND ++ REP PLEASE THANKS [ Register or Signin to view external links. ]