I would like assistance in setting up FTP on my RGH. I doubt that this can be explained simply, but this seems to be a place.
Here's the problem:
I have my RGH connected to the same router as my Xbox. My Xbox can connect to XBL. My RGH can connect, but it wants to stick me with 10.0.0.3:21. I'd like to know how to make it something other than that. (Manual setup). I acknowledge that this isn't really JTAG Tech Support, but idk. I believe this is the problem, but I'm not sure. If you'd like to write me a tutorial on everything, go ahead.
Info:
Yes, I have DashLaunch. Yes, I have liveblock enabled. Yes, I have FTP enabled.
I doubt you need this for this, but
1.What motherboard: Zephyr
2.RGH or Jtag: RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) Above. I'm not really going to answer that unless it's necessary, and I doubt that it is.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) None
5. Do you have your OG Nand ? Nope.

3./4.
My rgh has a problem with my hdmi hub. My RGH displays "no signal" when plugged in through the hub, but works fine when plugged directly into tv.

My retail works fine with the hub.

Please help.

1. Jasper
2. RGH

BoSsLoBbYz wrote

QuizResults wrote

1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) When i turn it off, it will (somtimes) stay on for a little while then the green power button comes on then turns off. and ive updated the dash to 14717 about 1-1 1/2 Months ago.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) (Sometimes) when opening something it will take a while
5. Do you have your OG Nand ? Yep

If it is a RGH then I don't know why you are getting e79 You would more likely get a not booting at all. I don't think it has anything to do with your nand. You most likely have what me and carl call a trolly falcon. What would probably help stabilize the boot times and stop the RROD from coming up is 1FT HI-GRADE LOW-LOSS 50 OHM DOUBLE SHIELDED CABLE on the Blue wire replace it. Then through xex menu make sure that you are setting the fan speed to 100%

For one, Carlooch said no one can answer questions except for him and two other people. And for two, what are you even talking about? He never said he's getting e79 and he never said he's getting RROD. This is probably why Carlooch said no one is to answer questions.

Konviicted wrote

BoSsLoBbYz wrote

QuizResults wrote

1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) When i turn it off, it will (somtimes) stay on for a little while then the green power button comes on then turns off. and ive updated the dash to 14717 about 1-1 1/2 Months ago.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) (Sometimes) when opening something it will take a while
5. Do you have your OG Nand ? Yep

If it is a RGH then I don't know why you are getting e79 You would more likely get a not booting at all. I don't think it has anything to do with your nand. You most likely have what me and carl call a trolly falcon. What would probably help stabilize the boot times and stop the RROD from coming up is 1FT HI-GRADE LOW-LOSS 50 OHM DOUBLE SHIELDED CABLE on the Blue wire replace it. Then through xex menu make sure that you are setting the fan speed to 100%

For one, Carlooch said no one can answer questions except for him and two other people. And for two, what are you even talking about? He never said he's getting e79 and he never said he's getting RROD. This is probably why Carlooch said no one is to answer questions.

He used to be a member and was on the list at time of posting.

5KMods wrote

Konviicted wrote

BoSsLoBbYz wrote

QuizResults wrote

1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) When i turn it off, it will (somtimes) stay on for a little while then the green power button comes on then turns off. and ive updated the dash to 14717 about 1-1 1/2 Months ago.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) (Sometimes) when opening something it will take a while
5. Do you have your OG Nand ? Yep

If it is a RGH then I don't know why you are getting e79 You would more likely get a not booting at all. I don't think it has anything to do with your nand. You most likely have what me and carl call a trolly falcon. What would probably help stabilize the boot times and stop the RROD from coming up is 1FT HI-GRADE LOW-LOSS 50 OHM DOUBLE SHIELDED CABLE on the Blue wire replace it. Then through xex menu make sure that you are setting the fan speed to 100%

For one, Carlooch said no one can answer questions except for him and two other people. And for two, what are you even talking about? He never said he's getting e79 and he never said he's getting RROD. This is probably why Carlooch said no one is to answer questions.

He used to be a member and was on the list at time of posting.

Why does it say you disliked almost every single post in this thread?

1.What motherboard| Jasper
2.RGH or Jtag| Rgh
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)| I get segmentation fault when trying to update nand through xell.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)| Rgh not booting
5. Do you have your OG Nand ?| Yes.

1.What motherboard Falcon
2.RGH or Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)
I have dumped my nand and created the ecc image but I am unable to write it to the board get fail to write to every block. I'm using a matrix spi v2, I do not have a glitcher install (not sure if that is the problem). [ Register or Signin to view external links. ] [ Register or Signin to view external links. ] images show my soldering but as I have manged to get the NAND off the board I don't see why putting ecc should be a problem due to soldering. Dash verison is 2.0.14719.0 so will have a split CB

Not seeing any physical errors,

And Yes to the NAND

1.What motherboard - idk

2.RGH or Jtag - jtag

3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) I want to learn how to get back in the biz! I want to know how to get tools setup

5. Do you have your OG Nand ? Dont think so

I have a falcon mother board.
Jtag.
My only problem is that I havent kept up with all the updates for the dashboards, I am currently on freeboot.32. And I am wanting to get it back up and running to use for the upcoming games.
The original nand is MIA, the person I bought it from never sent me the nand or anything I had to piece together.

1.What motherboard Falcon

2.RGH or Jtag
R-JTAG

3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)
I installed mw2 on my hdd then went on dashboard then tried to go back on xex menu but it fails 3 times so i reboot my console and got E 74

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)
E 74 / 1 bottom light
[ Register or Signin to view external links. ]

5. Do you have your OG Nand ?
Yes