You are viewing our Forum Archives. To view or take place in current topics click here.
help with jtag freezing?
Posted:

help with jtag freezing?Posted:

Littlefoot133
  • Junior Member
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
title pretty much says it all. i have a falcon jtag running on the newest dash. its been freezing since before i updated but if anyone could help thatd be awesome
#2. Posted:
TTG_L0BBIEZz
  • TTG Natural
Status: Offline
Joined: Feb 17, 201113Year Member
Posts: 989
Reputation Power: 42
Status: Offline
Joined: Feb 17, 201113Year Member
Posts: 989
Reputation Power: 42
Does it freeze in the same spot like on bootup?
Does it freeze when it gets hot?
Have you checked the wiring in it?

If it freezes in the same spot on boot it could be a bad flash.
But if it boots and freezes once hot you might need a gpu reball (that's how I fix it. A reflow might do it)

Or if the wiring is starting to cold solder than it is possible that could cause freezing.
#3. Posted:
5KMods
  • TTG Undisputed
Status: Offline
Joined: Jun 19, 201014Year Member
Posts: 5,070
Reputation Power: 216
Status: Offline
Joined: Jun 19, 201014Year Member
Posts: 5,070
Reputation Power: 216
I would play with wiring positioning if its a RGH, reroute the wires there are areas on the board that cause interference with the pulse sent to the CPU.
#4. Posted:
Littlefoot133
  • Junior Member
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
TTG_L0BBIEZz wrote Does it freeze in the same spot like on bootup?
Does it freeze when it gets hot?
Have you checked the wiring in it?

If it freezes in the same spot on boot it could be a bad flash.
But if it boots and freezes once hot you might need a gpu reball (that's how I fix it. A reflow might do it)

Or if the wiring is starting to cold solder than it is possible that could cause freezing.


well it does it pretty randomly. sometimes it will run for like an hour then freeze others maybe like 15 minutes. im just very lost
#5. Posted:
Littlefoot133
  • Junior Member
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
5KMods wrote I would play with wiring positioning if its a RGH, reroute the wires there are areas on the board that cause interference with the pulse sent to the CPU.


its a jtag not rgh. does it matter?
#6. Posted:
TTG_L0BBIEZz
  • TTG Natural
Status: Offline
Joined: Feb 17, 201113Year Member
Posts: 989
Reputation Power: 42
Status: Offline
Joined: Feb 17, 201113Year Member
Posts: 989
Reputation Power: 42
Littlefoot133 wrote
5KMods wrote I would play with wiring positioning if its a RGH, reroute the wires there are areas on the board that cause interference with the pulse sent to the CPU.


its a jtag not rgh. does it matter?


You cannot play with the wiring in a jtag. Only an rgh

Do not mess with the wires especially if you don't know what you're doing.

I don't think he read the part where you put "jtag" in op
#7. Posted:
5KMods
  • TTG Undisputed
Status: Offline
Joined: Jun 19, 201014Year Member
Posts: 5,070
Reputation Power: 216
Status: Offline
Joined: Jun 19, 201014Year Member
Posts: 5,070
Reputation Power: 216
If it was here at the shop, I'd reflow it then test for freezing majority of the time freezing is just another symptom of RROD ( hardware failure).
#8. Posted:
Littlefoot133
  • Junior Member
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
Status: Offline
Joined: Nov 19, 201212Year Member
Posts: 98
Reputation Power: 3
5KMods wrote If it was here at the shop, I'd reflow it then test for freezing majority of the time freezing is just another symptom of RROD ( hardware failure).

How much would you charge me to let you do that?
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.