ISTEALFROMWAL-MART wrote is the tip that plugs in metal or plastic

the tips of the plugs are metal

TTG_OMERTA wrote this seems like it is the brick ay because the xbox should at least turn on with some form of light hmmm just do some research dude like google your problem and maybe you'll get lucky and find something that relates to your issue. Also have you checked to make sure the power brick your using has the correct wattage to what your xbox needs?

well it doesnt turn on its screwed up..

If power brick goes red as soon as you plug it into the 360 you have a short on the board. Check your usb ports are damaged and the points not touching eachother. If it is not that open it up and make sure there are no loose pieces of metal in there and that the jtag wiring is all in place. If it is none of these I am afraid you likely have a component failure on the board and it is shorting out the rest of the board and unless you have a multimeter and lots of patience it is a dead 360.

R3cKL3SS_aM wrote Sounds like you may have hardware failure with the contacts of the xbox it's self thats the worst news!

Good news it may just be the Power brick its self?

yeaa i think this guy is right

Wedge It In Really Hard Try That

craigysharpy wrote If power brick goes red as soon as you plug it into the 360 you have a short on the board. Check your usb ports are damaged and the points not touching eachother. If it is not that open it up and make sure there are no loose pieces of metal in there and that the jtag wiring is all in place. If it is none of these I am afraid you likely have a component failure on the board and it is shorting out the rest of the board and unless you have a multimeter and lots of patience it is a dead 360.

i had the same problem its just F##ked

fat_tom wrote

craigysharpy wrote If power brick goes red as soon as you plug it into the 360 you have a short on the board. Check your usb ports are damaged and the points not touching eachother. If it is not that open it up and make sure there are no loose pieces of metal in there and that the jtag wiring is all in place. If it is none of these I am afraid you likely have a component failure on the board and it is shorting out the rest of the board and unless you have a multimeter and lots of patience it is a dead 360.

i had the same problem its just F##ked

Yes it usually does got a load of boards at home with either this or 3rrod secondary error 0001 or 0002.

replace your powerbrick or try pluging it directly into a outlet instead of into a surge protector

I believe you might be fuc***. Is it a jtag or just a xbox?


If it's an xbox maybe you could send it in....

SM4CK5HOT123 wrote Wedge It In Really Hard Try That

LOL just hit it like a old tele ;) Haha

Mattie <3