***I dont believe the NANDX is being made anymore so thats probably why. As for the JRP, that shouldnt be too hard to find. Right now XCONSOLES has 1 JRP V2 in stock, and like 200 JRP V1.1.

***The main difference between JRP V1.1 and V2 is that on the V2 you are able to monitor post_out with rater. Used in CR3/R-Jtag installations. V2 is a little more but worth the feature. Maybe we will be able to use rater with the new CR4 XL that is coming out so it would be best to buy the V2 if possible. If not V1.1 will get the job done for basic read/write of the nand.

***Also take note that if you are going to need to read a Corona 4gb nand you will need a 4gb R/W kit.

***Hope this was enough info for you. If you have any other questions feel free to ask!!

I will probably be starting out with RGHing Falcons for now, so I think the v1.1 should be fine.

Also, can you link me to the ones on Xconsoles? Reason is because my friend sent me a link to one, but it won't let me view the JRP for some reason.

Another question, if I buy a stock Falcon lets say, and it's not updated to the latest dash. Am I able to just connect it to XBL and just update it to the latest dash from there and then RGH it?

Thanks for the help

If you are going to be working on falcons that are on the newest dashboard, that would make them RGH2.0. Falcons and RGH2 dont go well together. It can take a lot of tweaking and tuning to get decent boot times UNLESS you use TX's R-Jtag chip. The R-Jtag has post out monitoring with rater which leads me back to saying buy the JRP V2!!

ALSO, for you to see the JRP on XCONSOLES I believe you need to be signed into your account or it will not show up!

JrMods wrote ***I dont believe the NANDX is being made anymore so thats probably why. As for the JRP, that shouldnt be too hard to find. Right now XCONSOLES has 1 JRP V2 in stock, and like 200 JRP V1.1.

***The main difference between JRP V1.1 and V2 is that on the V2 you are able to monitor post_out with rater. Used in CR3/R-Jtag installations. V2 is a little more but worth the feature. Maybe we will be able to use rater with the new CR4 XL that is coming out so it would be best to buy the V2 if possible. If not V1.1 will get the job done for basic read/write of the nand.

***Also take note that if you are going to need to read a Corona 4gb nand you will need a 4gb R/W kit.

***Hope this was enough info for you. If you have any other questions feel free to ask!!

Last I heard, they were supposed to be like the Proto V2 in the Small Form Factor. That being said, I doubt it will have Rater, as it has been made MUCH easier to tune

Just My Opinion.

SalaMods wrote

JrMods wrote ***I dont believe the NANDX is being made anymore so thats probably why. As for the JRP, that shouldnt be too hard to find. Right now XCONSOLES has 1 JRP V2 in stock, and like 200 JRP V1.1.

***The main difference between JRP V1.1 and V2 is that on the V2 you are able to monitor post_out with rater. Used in CR3/R-Jtag installations. V2 is a little more but worth the feature. Maybe we will be able to use rater with the new CR4 XL that is coming out so it would be best to buy the V2 if possible. If not V1.1 will get the job done for basic read/write of the nand.

***Also take note that if you are going to need to read a Corona 4gb nand you will need a 4gb R/W kit.

***Hope this was enough info for you. If you have any other questions feel free to ask!!

Last I heard, they were supposed to be like the Proto V2 in the Small Form Factor. That being said, I doubt it will have Rater, as it has been made MUCH easier to tune

Just My Opinion.

I heard that as well. I was also hoping that they would be so good/reliable that minimal tuning is necessary. But hey, its always good to have up to date TX products. And it couldnt hurt to buy the V2 just in case you need the feature in the future...

So, what if there not on the newest dash? Then I can just do RGH1.

I am going to buy the V2, but I can't seem to find it on there site. Can you link me too it?

XeX-G_0_d wrote So, what if there not on the newest dash? Then I can just do RGH1.

I am going to buy the V2, but I can't seem to find it on there site. Can you link me too it?

RGH1 will work just fine on falcons but the dashboard needs to be lower than 14699.

Also it seems that somebody must have just purchased the last JRP V2 from XCONSOLES......I just checked again and the stock has changed to sold out :/

Ok, I will make sure to check that before I buy any consoles.

Damn , are there any other sites that would have them? I have checked a few, and couldn't find any that weren't sold out.

It doesnt look like any other sites have the V2 atm. There is one for auction on ebay right now though lol.