ColoredHacks wrote

Are you on a wired or wireless connection?

I am on a wired connection

Are you flashing the kv to the console, or are you just letting xblse spoof the kv by putting it on the root of your hard drive?

1. Xenon Jtag
2. What seems to be the problem ? The console shows no screen and is 3 RROD
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) The error code is 0200. 3 RROD
5. Do you have your OG Nand ? Yes

thanks dude so much for this topic. my little brother needed help flashing a KV.

DOLLARxHD wrote 1. Xenon Jtag
2. What seems to be the problem ? The console shows no screen and is 3 RROD
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) The error code is 0200. 3 RROD
5. Do you have your OG Nand ? Yes

The error you have is E32, it is a cold joint in the RAM/GPU area causing no audio/video. Some ways to fix it are reflow/reball and x-clamp replacement (if done properly). A page just for added info if you feel like looking at it [ Register or Signin to view external links. ]

SRT wrote

DOLLARxHD wrote 1. Xenon Jtag
2. What seems to be the problem ? The console shows no screen and is 3 RROD
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) The error code is 0200. 3 RROD
5. Do you have your OG Nand ? Yes

The error you have is E32, it is a cold joint in the RAM/GPU area causing no audio/video. Some ways to fix it are reflow/reball and x-clamp replacement (if done properly). A page just for added info if you feel like looking at it [ Register or Signin to view external links. ]

I fixed that, But now when I boot my jtag and try and install a new nand through xell my USB doesn't detect and my controller doesn't sink. I've re-flashed my nand many times but this time it's not detecting any of my USB sticks. I have xenon.elf and nandflash.bin on my USB's

DOLLARxHD wrote

SRT wrote

DOLLARxHD wrote 1. Xenon Jtag
2. What seems to be the problem ? The console shows no screen and is 3 RROD
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) The error code is 0200. 3 RROD
5. Do you have your OG Nand ? Yes

The error you have is E32, it is a cold joint in the RAM/GPU area causing no audio/video. Some ways to fix it are reflow/reball and x-clamp replacement (if done properly). A page just for added info if you feel like looking at it [ Register or Signin to view external links. ]

I fixed that, But now when I boot my jtag and try and install a new nand through xell my USB doesn't detect and my controller doesn't sink. I've re-flashed my nand many times but this time it's not detecting any of my USB sticks. I have xenon.elf and nandflash.bin on my USB's

If you're trying to update your nand through Xell then take the xenon.elf off of your USB and rename the nandflash.bin to updflash.bin.

SRT wrote

DOLLARxHD wrote

SRT wrote

DOLLARxHD wrote 1. Xenon Jtag
2. What seems to be the problem ? The console shows no screen and is 3 RROD
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) The error code is 0200. 3 RROD
5. Do you have your OG Nand ? Yes

The error you have is E32, it is a cold joint in the RAM/GPU area causing no audio/video. Some ways to fix it are reflow/reball and x-clamp replacement (if done properly). A page just for added info if you feel like looking at it [ Register or Signin to view external links. ]

I fixed that, But now when I boot my jtag and try and install a new nand through xell my USB doesn't detect and my controller doesn't sink. I've re-flashed my nand many times but this time it's not detecting any of my USB sticks. I have xenon.elf and nandflash.bin on my USB's

If you're trying to update your nand through Xell then take the xenon.elf off of your USB and rename the nandflash.bin to updflash.bin.

I have xell reloaded. But the USB doesn't even get detected.

is my rgh banned I'm getting z code 1815-1903

I'm looking into RGH'n my old phat.

Could you link me a decent tutorial on it and where i can get the gear in the UK?

Thanks

1.What motherboard Falcon
2.RGH or Jtag RGH
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) I tried to flash a new KV and now it won't boot. Xell starts, but I think it needs to be updated, because it gets stuck at, "looking for file on local media and FTFP"
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) It won't boot
5. Do you have your OG Nand ? Yes I do