ThatSwaggyModz wrote everytime i click plugin on dashlaunch it crashes

You running 16756 dashboard? Built with Jrunner?

If so, that's a known issue.

You need to rebuild your nand with XeBuild GUI, then flash that to the console and the DL crashing will stop.

ok i will try that thanks

taken from swizzy's (the author of Xebuild gui) guide:

Since you have a 4GB console i'm going to go all out and guess you didn't know how this works, it's quite simple to add Corona4G support for xeBuild GUI, however it does require you to edit a few things and requires some special settings (untill i've released xeBuild GUI 3.0)

NOTE: You'll get alot of warnings about size beeing incorrect, just press No on every question and ignore it... if you press Yes it'll just fail verifications anyways... so don't ;)

The settings you need are:
Build Type: Freeboot (RGH 2.0)
Motherboard: Corona
Advanced Mode: Enabled
Failsafe: Disabled
Open Parameter/Argument Editor prior to starting xeBuild/Python: Checked

Here's a screenshot of these settings:

[ Register or Signin to view external links. ]

And of course you have to feed the app the 1BLKey which is "DD88AD0C9ED669E7B56794FB68563EFA", you also have to feed it your CPUKey

Once you click on Generate you'll be presented with a window that looks something like the screenshot below, what you need to do is add "4g" to "corona" like i've done in the screenshot, after that you need to press the save button

[ Register or Signin to view external links. ]