You are viewing our Forum Archives. To view or take place in current topics click here.
Xenon JTAG | No sync error .Christmas Lights.willpayforHelp$
Posted:

Xenon JTAG | No sync error .Christmas Lights.willpayforHelp$Posted:

JtagModders
  • Wise One
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
after 3 year's of having my JTAG , I've never seen the Christmas Lights . It finalllly booted into Xell , it has the No sync error , and its been like this for 3 year's , I just got my x360 Super NAND Flasher in the Mail . I just wanted to see if my JTAG still powered on & everything . But for the 1st time it booted Xell for me , So I tryed to get Xell boot again ... and it wouldn't till I plugged in a DVD Drive , its finally showing me the Christmas Lights & booting Xell . I finally got my CPU Key ,and I have my Updflash.bin saved onto my USB Flash Drive , I formatted it to the 32 . and moved my updflash.bin onto the USB Flash drive , and when I boot into Xell again ... it doesn't read the NAND . It say's that it failed , 10 time's or something like that . whats the Best thing for me to do @ this point ? . Please HELP me

| Edit | I will pay you $5 or $10 on PayPal for your Help if you can Help me . I just got a new Soldering tip for my Soldering Iron , Flux & I just got my x360 Super NAND Flasher in the Mail . Please helppppp me


Last edited by JtagModders ; edited 2 times in total
#2. Posted:
Pro-Zombie-Killer
  • Challenger
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Reflash your original Nand back to it & it should work fine after, I had this, it was because i flashed a corrupted KV to it

If you can still boot into Xell do the above
#3. Posted:
Pro-Zombie-Killer
  • Challenger
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
If that is your original Nand thats failing to flash your screwed lol
#4. Posted:
JtagModders
  • Wise One
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
I've flashed a few different NAND's to my JTAG , this is the only updflash.bin I have left . All my old file's are on my Laptop that I don't have access to , I was watching this Video on YouTube . I unplugged all the cable's from my Xbox 360 and plugged the USB Flash drive 1st booted Xell it still didn't work for me . Is there anything else that I can do ?
#5. Posted:
Pro-Zombie-Killer
  • Challenger
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
If you can boot into Xell try to freeze your jtag

To do this Turn on your Jtag via Eject button & while your disc tray is opening Unplug the power cable from the back on the console < this will cause your console to freeze, then wait 10 seconds & plug it back in then wait & see if the jtag turns its self on, If it dont then turn it on by the Eject button again then it should boot up into Xell.

If this dont work & your still unable to reflash your original nand seek help from experienced jtag helpers.

Im telling you what i know because i had the same problem & i contacted the person i bought mine from & he suggested the above, & if this didnt work then a full reflash was required
#6. Posted:
Pro-Zombie-Killer
  • Christmas!
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
JtagModders wrote I've flashed a few different NAND's to my JTAG , this is the only updflash.bin I have left . All my old file's are on my Laptop that I don't have access to , I was watching this Video on YouTube . I unplugged all the cable's from my Xbox 360 and plugged the USB Flash drive 1st booted Xell it still didn't work for me . Is there anything else that I can do ?


Unplug your HDD & controllers, Boot using Eject with USB plugged in

Have you tried to freeze your jtag?
#7. Posted:
Pro-Zombie-Killer
  • Christmas!
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
JtagModders wrote I've flashed a few different NAND's to my JTAG , this is the only updflash.bin I have left . All my old file's are on my Laptop that I don't have access to , I was watching this Video on YouTube . I unplugged all the cable's from my Xbox 360 and plugged the USB Flash drive 1st booted Xell it still didn't work for me . Is there anything else that I can do ?



Do you have the Original Nand File that was given to you when you purchased the jtag?


If you do then Flash this to the jtag NOT any other nand, You must flash your original nand file so you no its clean & will work
#8. Posted:
JtagModders
  • Wise One
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
Pro-Zombie-Killer wrote If you can boot into Xell try to freeze your jtag

To do this Turn on your Jtag via Eject button & while your disc tray is opening Unplug the power cable from the back on the console < this will cause your console to freeze, then wait 10 seconds & plug it back in then wait & see if the jtag turns its self on, If it dont then turn it on by the Eject button again then it should boot up into Xell.

If this dont work & your still unable to reflash your original nand seek help from experienced jtag helpers.

Im telling you what i know because i had the same problem & i contacted the person i bought mine from & he suggested the above, & if this didnt work then a full reflash was required


I can boot Xell I just did about 5 time's , I unplugged the USB Flash drive , the Av Power supply . from the Wall & the Console plugged my USB Flash drive back in & then the Power cable & Av . It detects that there is a USB in port # 2 or # 1 I've tryed both of them . It just doesn't read the NAND or whatever . I had 1 saved as updflash.bin formatted @ 32 & default . and then I've tryed Format @ 32 with 32 kylobytes & 62 kylobytes or whatever . Idk what to do , I've done everything . I paid the $20 for this x360 Super NAND Flasher & if I can't use it , Because my JTAG's messed up . I'll be stuck with it -_- , I'd pay for help right now .
#9. Posted:
JtagModders
  • Wise One
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
Status: Offline
Joined: May 19, 201113Year Member
Posts: 563
Reputation Power: 20
Pro-Zombie-Killer wrote
JtagModders wrote I've flashed a few different NAND's to my JTAG , this is the only updflash.bin I have left . All my old file's are on my Laptop that I don't have access to , I was watching this Video on YouTube . I unplugged all the cable's from my Xbox 360 and plugged the USB Flash drive 1st booted Xell it still didn't work for me . Is there anything else that I can do ?



Do you have the Original Nand File that was given to you when you purchased the jtag?


If you do then Flash this to the jtag NOT any other nand, You must flash your original nand file so you no its clean & will work



I was never supplied with my Original NAND , I paid $180 for this JTAG 3 year's , Thankyou for responding back to me .
#10. Posted:
Pro-Zombie-Killer
  • Christmas!
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
Status: Offline
Joined: Sep 06, 201212Year Member
Posts: 182
Reputation Power: 7
So your jtag reads your USB but not the nand file?
Jump to:
You are viewing our Forum Archives. To view or take place in current topics click here.