Admiral wrote

-Skittle wrote

cpp_modder wrote

-Skittle wrote I agree with Ivancho, an RGH is much better but more expensive. If you have the money, then take a look at sellers in the marketplace. If you're from the UK then I highly suggest Monoxide

rgh are easy to break and have a lot of hardware issues just get a jtag. With fan mod and make them put extra solder on the resisters I personally prefer the xenon motherboard because of the kvs it take type 1 and 2 just make sure you know what you are doing with the console before buying or learn with it when you buy but if you have not done any flashing before don't start that first

You are very mislead. RGH's are much more reliable than JTAG's and Xenon motherboards are absolutely terrible. The KV type doesn't matter as there is a program that very simply converts type 2 KV's into type 1 KV's and vice versa. Yes, maybe you could improve it if you know how to solder and modify it yourself but overall an RGH is better than a JTAG by a mile.

You are both wrong, JTAG and RGH do the exact same thing, the only difference is boot time. Neither is more reliable than the other. The only advantage that RGH has over JTAG is that it can be done on the slim consoles. However, Jaspers rarely get any RROD issues or anything of that nature. RGH is cheaper though.

RGH's are more reliable than JTAG's as they are mostly on newer consoles which in-turn have less chance of RRODing and overheating. JTAG's can only be made on older dashboards so that is a disadvantage also.

-Skittle wrote

Admiral wrote

-Skittle wrote

cpp_modder wrote

-Skittle wrote I agree with Ivancho, an RGH is much better but more expensive. If you have the money, then take a look at sellers in the marketplace. If you're from the UK then I highly suggest Monoxide

rgh are easy to break and have a lot of hardware issues just get a jtag. With fan mod and make them put extra solder on the resisters I personally prefer the xenon motherboard because of the kvs it take type 1 and 2 just make sure you know what you are doing with the console before buying or learn with it when you buy but if you have not done any flashing before don't start that first

You are very mislead. RGH's are much more reliable than JTAG's and Xenon motherboards are absolutely terrible. The KV type doesn't matter as there is a program that very simply converts type 2 KV's into type 1 KV's and vice versa. Yes, maybe you could improve it if you know how to solder and modify it yourself but overall an RGH is better than a JTAG by a mile.

You are both wrong, JTAG and RGH do the exact same thing, the only difference is boot time. Neither is more reliable than the other. The only advantage that RGH has over JTAG is that it can be done on the slim consoles. However, Jaspers rarely get any RROD issues or anything of that nature. RGH is cheaper though.

RGH's are more reliable than JTAG's as they are mostly on newer consoles which in-turn have less chance of RRODing and overheating. JTAG's can only be made on older dashboards so that is a disadvantage also.

Slims do have better cooling than PHATS as I stated before. However, a JTAG Jasper is better than a RGH Slim in every aspect. Neither overheat, and the JTAG boots instantly

Admiral wrote

-Skittle wrote

Admiral wrote

-Skittle wrote

cpp_modder wrote

-Skittle wrote I agree with Ivancho, an RGH is much better but more expensive. If you have the money, then take a look at sellers in the marketplace. If you're from the UK then I highly suggest Monoxide

rgh are easy to break and have a lot of hardware issues just get a jtag. With fan mod and make them put extra solder on the resisters I personally prefer the xenon motherboard because of the kvs it take type 1 and 2 just make sure you know what you are doing with the console before buying or learn with it when you buy but if you have not done any flashing before don't start that first

You are very mislead. RGH's are much more reliable than JTAG's and Xenon motherboards are absolutely terrible. The KV type doesn't matter as there is a program that very simply converts type 2 KV's into type 1 KV's and vice versa. Yes, maybe you could improve it if you know how to solder and modify it yourself but overall an RGH is better than a JTAG by a mile.

You are both wrong, JTAG and RGH do the exact same thing, the only difference is boot time. Neither is more reliable than the other. The only advantage that RGH has over JTAG is that it can be done on the slim consoles. However, Jaspers rarely get any RROD issues or anything of that nature. RGH is cheaper though.

RGH's are more reliable than JTAG's as they are mostly on newer consoles which in-turn have less chance of RRODing and overheating. JTAG's can only be made on older dashboards so that is a disadvantage also.

Slims do have better cooling than PHATS as I stated before. However, a JTAG Jasper is better than a RGH Slim in every aspect. Neither overheat, and the JTAG boots instantly

Yes, but you will have to work hard to find JTAGs nowadays so RGHs are a better choice. As new mod chips come out to RGH consoles, boot times will decrease.

why not just get a rgh that has flashed drive. I am sure there out there. just we can no long sell them from this site.

Rodent_Modz wrote why not just get a rgh that has flashed drive. I am sure there out there. just we can no long sell them from this site.

I was lucky enough to get my RGH with a flashed drive from Monoxide when they were allowed on here why are they not allowed? If flashed drives are used for piracy then that is the user that is at fault, not the seller.

Admiral wrote

-Skittle wrote

Admiral wrote

-Skittle wrote

cpp_modder wrote

-Skittle wrote I agree with Ivancho, an RGH is much better but more expensive. If you have the money, then take a look at sellers in the marketplace. If you're from the UK then I highly suggest Monoxide

rgh are easy to break and have a lot of hardware issues just get a jtag. With fan mod and make them put extra solder on the resisters I personally prefer the xenon motherboard because of the kvs it take type 1 and 2 just make sure you know what you are doing with the console before buying or learn with it when you buy but if you have not done any flashing before don't start that first

You are very mislead. RGH's are much more reliable than JTAG's and Xenon motherboards are absolutely terrible. The KV type doesn't matter as there is a program that very simply converts type 2 KV's into type 1 KV's and vice versa. Yes, maybe you could improve it if you know how to solder and modify it yourself but overall an RGH is better than a JTAG by a mile.

You are both wrong, JTAG and RGH do the exact same thing, the only difference is boot time. Neither is more reliable than the other. The only advantage that RGH has over JTAG is that it can be done on the slim consoles. However, Jaspers rarely get any RROD issues or anything of that nature. RGH is cheaper though.

RGH's are more reliable than JTAG's as they are mostly on newer consoles which in-turn have less chance of RRODing and overheating. JTAG's can only be made on older dashboards so that is a disadvantage also.

Slims do have better cooling than PHATS as I stated before. However, a JTAG Jasper is better than a RGH Slim in every aspect. Neither overheat, and the JTAG boots instantly

It's all opionated. And reliability is not on boot times... It's the failure rate... JTAGs have a MUCH higher failure rate than RGHs. I'm not an expert on it but I believe the hardware used to RGH a console is more stable than the homemade diode and wires you use.

@OP, you really should do more research if you ask this question. RGHs and flashed consoles are two very different things. It depends on what you want to do with the console. Just modding games? Get a flashed console then of you don't get bored with modding go up to another console. Although I will warn you its a huge waste of money.

Cheeba wrote

Admiral wrote

-Skittle wrote

Admiral wrote

-Skittle wrote

cpp_modder wrote

-Skittle wrote I agree with Ivancho, an RGH is much better but more expensive. If you have the money, then take a look at sellers in the marketplace. If you're from the UK then I highly suggest Monoxide

rgh are easy to break and have a lot of hardware issues just get a jtag. With fan mod and make them put extra solder on the resisters I personally prefer the xenon motherboard because of the kvs it take type 1 and 2 just make sure you know what you are doing with the console before buying or learn with it when you buy but if you have not done any flashing before don't start that first

You are very mislead. RGH's are much more reliable than JTAG's and Xenon motherboards are absolutely terrible. The KV type doesn't matter as there is a program that very simply converts type 2 KV's into type 1 KV's and vice versa. Yes, maybe you could improve it if you know how to solder and modify it yourself but overall an RGH is better than a JTAG by a mile.

You are both wrong, JTAG and RGH do the exact same thing, the only difference is boot time. Neither is more reliable than the other. The only advantage that RGH has over JTAG is that it can be done on the slim consoles. However, Jaspers rarely get any RROD issues or anything of that nature. RGH is cheaper though.

RGH's are more reliable than JTAG's as they are mostly on newer consoles which in-turn have less chance of RRODing and overheating. JTAG's can only be made on older dashboards so that is a disadvantage also.

Slims do have better cooling than PHATS as I stated before. However, a JTAG Jasper is better than a RGH Slim in every aspect. Neither overheat, and the JTAG boots instantly

It's all opionated. And reliability is not on boot times... It's the failure rate... JTAGs have a MUCH higher failure rate than RGHs. I'm not an expert on it but I believe the hardware used to RGH a console is more stable than the homemade diode and wires you use.

@OP, you really should do more research if you ask this question. RGHs and flashed consoles are two very different things. It depends on what you want to do with the console. Just modding games? Get a flashed console then of you don't get bored with modding go up to another console. Although I will warn you its a huge waste of money.

I was just wanting your alls opinions on it and have done research just wanted to know your alls opinions...

I'm starting to wonder if people just come on here to tell people to research things... Not to be an ass but the OP asked for opinions, not what he should get... I don't think it would be necessary to research if he just wanted to ask for an opinion

It depends on what your intentions are.

Modding? RGH.
Playing ISOs? Flashed console.

I personally have an RGH and I love it. I sometimes use it as a retail to play with friends and play COD but I'll use small public cheater mods to my advantage. ;)
I host on it, I troll on it. It's really fun, and the most you can do with a flashed console (modding wise) is ISO modding.