I have an original Falcon JTAG on Pre-NXE Dash and I get the E20 0110 RRODs all the time and sometimes I can get to the pre-nxe dash but after reboot it goes back to 3 lights E20 0110, also for some reason idk if it will continue or it just occurred once Ive got the dash running is the controllers wont sync?! thanks in advanced, I have stuff in mail to hopefully fix the JTAG but and prior help would be great!

I am saving up 4 a rgh I think I might go with falcon because I want cod mods...(that's not all) I need some questions answered... It will be my first.

1.where can i get cheap kv's? I know it's a must have.

2.should I even use xblse? I heard u get banned easier

3.what type should I get 4 disk burning cod lobby's and one that has a less chance of getting RROD.

4.my budget is 200$ (US) I need something that will last

5.i need too connect it too my computer

If u guys can answer me that would be great thx ttyl

One more thing what should I do when I first get it? Thx

XEX_Nike_Loader wrote i have a jtag xenon and every time i boot it up it has 3 red rings
i haven't been on it to recently but when i was on it i was on mw2 system link with my retail xbox. i was on tu6, but when i would go on the patch my one ring was red.

its a xenon needs probably good reflow or reballed they were the first xboxes ever made or save your money and buy something like a jasper

TheInsider wrote 1.What motherboard: Falcon
2.RGH or Jtag: RGH1
3. What seems to be the problem ? I cant update
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc):when i try to get onto xbox live i get "Updated Required" even though i think i have installed the laatest dashboard
5. Do you have your OG Nand ? yes

i cant flash my KV to insert another one i use Jrunner and do everything but no fcrt.bin shows up no matter what i do i need help someone help if you can please. i searched for solutions but cant find any.

please help thank you

may need to be reflashed manually can you tell me the 2/3 rrod code is 2 red lights could be over heating issue

SleazyCrab wrote I am saving up 4 a rgh I think I might go with falcon because I want cod mods...(that's not all) I need some questions answered... It will be my first.

1.where can i get cheap kv's? I know it's a must have.

2.should I even use xblse? I heard u get banned easier

3.what type should I get 4 disk burning cod lobby's and one that has a less chance of getting RROD.

4.my budget is 200$ (US) I need something that will last

5.i need too connect it too my computer

If u guys can answer me that would be great thx ttyl

One more thing what should I do when I first get it? Thx

spend a little extra money and get a Jasper also yes you will need a computer or laptop to add files or use xbox 360 Neighborhood

hey I got a trinity rgh and its going to be here tomorrow is there any way someone can help with the files and patches im a noob to modding thanks

UnicornMods wrote hey I got a trinity rgh and its going to be here tomorrow is there any way someone can help with the files and patches im a noob to modding thanks

https://www.youtube.com/playlist?list=PLn7ji3VsPy3G08cHNCHyT4Yj-WWYhw8D7

1.What motherboard Xenon
2.RGH or Jtag Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) After about 2 minutes of it being on, it makes a weird noise in the xbox and the screen freezes.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) None.
5. Do you have your OG Nand ? No?

MHUTricK wrote 1.What motherboard Xenon
2.RGH or Jtag Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) After about 2 minutes of it being on, it makes a weird noise in the xbox and the screen freezes.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) None.
5. Do you have your OG Nand ? No?

1st thing its jtag not a rgh. 2 leds is over heating. freezing is cause its over heated and failing

E79 could be do to a bad flash. due to you probably updated the nand wrong do you have the back up nand?

Rodent_Modz wrote

MHUTricK wrote 1.What motherboard Xenon
2.RGH or Jtag Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) After about 2 minutes of it being on, it makes a weird noise in the xbox and the screen freezes.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) None.
5. Do you have your OG Nand ? No?

1st thing its jtag not a rgh. 2 leds is over heating. freezing is cause its over heated and failing

E79 could be do to a bad flash. due to you probably updated the nand wrong do you have the back up nand?

I haven't used the xenon for nearly half a year, I haven't updated anything, I do have the backup nand.

MHUTricK wrote

Rodent_Modz wrote

MHUTricK wrote 1.What motherboard Xenon
2.RGH or Jtag Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) After about 2 minutes of it being on, it makes a weird noise in the xbox and the screen freezes.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) None.
5. Do you have your OG Nand ? No?

1st thing its jtag not a rgh. 2 leds is over heating. freezing is cause its over heated and failing

E79 could be do to a bad flash. due to you probably updated the nand wrong do you have the back up nand?

I haven't used the xenon for nearly half a year, I haven't updated anything, I do have the backup nand.

reflash the back up nand and see if its better

Rodent_Modz wrote

MHUTricK wrote

Rodent_Modz wrote

MHUTricK wrote 1.What motherboard Xenon
2.RGH or Jtag Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc) After about 2 minutes of it being on, it makes a weird noise in the xbox and the screen freezes.
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) None.
5. Do you have your OG Nand ? No?

1st thing its jtag not a rgh. 2 leds is over heating. freezing is cause its over heated and failing

E79 could be do to a bad flash. due to you probably updated the nand wrong do you have the back up nand?

I haven't used the xenon for nearly half a year, I haven't updated anything, I do have the backup nand.

reflash the back up nand and see if its better

Didn't work, and the sound didn't come from the Xbox, it just came from the T.V. from the freezing, it makes the pixels off or sometimes there is yellow and red lines going down the screen.