Downlaod the client off the website anbd drag in everything in the folder into the root of your HDD once done that, Reboot

RedWood wrote Downlaod the client off the website anbd drag in everything in the folder into the root of your HDD once done that, Reboot

Once you throw everything onto the root of the HDD, I'm pretty sure you'll need to load up Dashlaunch and set Teapot as plugin. So rebooting without putting as plugin would do nothing

Plugins should be as follows:

plugin1 = Hdd:\xbdm.xex
plugin2 = Hdd:\Teapot.xex
plugin3 = Hdd:\JRPC2.xex
plugin4 = Hdd:\RPC.xex
plugin5 = Hdd:\

I have provided all needed plugins within the "TEAPOT ROOT FILES" folder. Just place all of them on the root of your HDD (folders also supported), including the launch.ini file and then reboot.

RPC.xex is an updated version of XRPC.xex

You can also configure additional plugins in JRPC.ini

To register your console:

1) Hit the Guide button
2) Scroll all the way to the right of the guide until you're at the "Teapot Menu"
3) Select "Continue Now"
4) Then enter your email, and welcome name.

MAKE SURE YOU PUT TeapotCE.ini ONTO NEXT TO WHERE EVER Teapot.xex WAS INSTALLED - THIS WILL ENABLE YOU TO SAVE YOUR SETTINGS FOR THE TEAPOT ENGINE!



FAQ:
________________________________________

1) Make sure you have Teapot.xex set as plugin #2 in dashlaunch.

2) Clearing your system's cache can fix most of the more common issues. Go to Settings > Storage > Y on HDD > Clear System Cache - then try to test your connection.

3) KV.bin needs to be in the same location as Teapot.xex

4) If you reboot your console and it cannot connect to Xbox Live, disable liveblock, livestrong, and xhttp in the dashlaunch network settings. Then save, and reboot again.

Known Bugs:
_________________________________________

Currently none, will update.

Drag all files that are in the 'root' folder, do as above, reboot.

You'll have to sign up for the 7 day by adding an email when it pops up, then you add a welcome message.

Should reboot after that and you are all set to go.

(Make sure you have your network adaptor/Ethernet cable plugged in)

It worked, cheers

Fibril wrote

RedWood wrote Downlaod the client off the website anbd drag in everything in the folder into the root of your HDD once done that, Reboot

Once you throw everything onto the root of the HDD, I'm pretty sure you'll need to load up Dashlaunch and set Teapot as plugin. So rebooting without putting as plugin would do nothing

There is a included ini in the files i belive so doing that is not required