ways to fix.. Replace your X-Clamps. Or GPU Reflo. What happened when you get this error.. Dashboard Error Error within Xam.xex: possibly a dashboard update error. instructions.. Clear Any Failed system updates that cause the console to error. With the console off, press and hold the sync up button. While holding the sync button press the power button to turn on the console Continue to hold the sync button until the Console has booted up completely. Hope i helped.

lol ure jtag is proabably screwed its the worst form of red rings

well that means its **** up lol. but no sir, e78 is the worst.

you gonna have to redo you heat sinks and fix your x-clamps then re-flow your board.

Everyone is lying, e71 is a corrupted nand, I've fixed it 3 times before, never opening up my jtag.

iBeDavid wrote Everyone is lying, e71 is a corrupted nand, I've fixed it 3 times before, never opening up my jtag.

he is correct you have errors writing the nand and it cannot boot the dashboard correctly, use flash360 to put a new freeboot image on like fixing xmas lights

iTz_NoT_hD wrote

iBeDavid wrote Everyone is lying, e71 is a corrupted nand, I've fixed it 3 times before, never opening up my jtag.

he is correct you have errors writing the nand and it cannot boot the dashboard correctly, use flash360 to put a new freeboot image on like fixing xmas lights

What to do:
1) Find your original nand(will be called freeboot.bin or flashdmp.bin) and rename it updflash.bin and put on your usb stick, delete everything else.

2) Boot into xell by opening your disk drive.

3) Let it do its thing(will take about 5 mins)

4) Unplug the power cord, the disk drive should stay out - wait 30 seconds minimum

5) Plug the cord back in and press eject again, the disk should still stay out

6) Let it do its stuff(will take about 5 mins)

7) Turn off by power button

8) Unplug your power cord, AV cable, usb stick, ethernet/wireless & anything else + wait 1 minute

9) Plug all back in and turn on normally.

(Yes I wrote all this myself and know it works from previous experience)

oiJellov1 wrote ways to fix.. Replace your X-Clamps. Or GPU Reflo. What happened when you get this error.. Dashboard Error Error within Xam.xex: possibly a dashboard update error. instructions.. Clear Any Failed system updates that cause the console to error. With the console off, press and hold the sync up button. While holding the sync button press the power button to turn on the console Continue to hold the sync button until the Console has booted up completely. Hope i helped.

Lol copy and paste

TTGPogs

TTGPogs wrote

oiJellov1 wrote ways to fix.. Replace your X-Clamps. Or GPU Reflo. What happened when you get this error.. Dashboard Error Error within Xam.xex: possibly a dashboard update error. instructions.. Clear Any Failed system updates that cause the console to error. With the console off, press and hold the sync up button. While holding the sync button press the power button to turn on the console Continue to hold the sync button until the Console has booted up completely. Hope i helped.

Lol copy and paste

TTGPogs

obviously but it still helps him there was no need for your post