HIDDENKILLER wrote

-Jasper-x wrote Put your nand on root of USB ( Flashdmp.bin )

Rename it to updflash.bin

Put USB Into the JTAG

Boot in to xellous (Eject)

Let it update


Let it shutdown

Good to go

Thanks i know that man. but there is no display on my Tv

Had the same problem. Heres what I did:

-First check AV cables.
-If you had rrod and got the x-clamp fix, go to the next step. If not, go to step 8
-Turn your jtag off and unplug the fans
-Start it up again and let it run until you get 2 red lights.
-turn it off and wait for about 10 mins
-plug the fans back in and turn the jtag on.
-Screen should play fine.
STEP 8- Buy a heat gun (home depot or something)
-For about a half of an hour, have the heat gun on and evenly blowing over the motherboard WITHOUT the Heatsinks on.
-After, turn your jtag off and wait till it is COMPLETELY COOL
-Run it to see if the screen turn on.

REFLASHING YOUR NAND:
-Find your GOOD copy of your NAND (first dump)
-Get a USB drive and ROOT(not in any folders) of the USB
-Plug the USB into the jtag and boot into Xell with the DVD drive button
-When the screen says "Update Complete. Remove Update and Power Cycle", take out the USB and turn your jtag off then back on
-Play a game

Hope this helped if you have any questions feel free to PM me!

TAH4TxC4RB0N wrote

HIDDENKILLER wrote

-Jasper-x wrote Put your nand on root of USB ( Flashdmp.bin )

Rename it to updflash.bin

Put USB Into the JTAG

Boot in to xellous (Eject)

Let it update


Let it shutdown

Good to go

Thanks i know that man. but there is no display on my Tv

Had the same problem. Heres what I did:

-First check AV cables.
-If you had rrod and got the x-clamp fix, go to the next step. If not, go to step 8
-Turn your jtag off and unplug the fans
-Start it up again and let it run until you get 2 red lights.
-turn it off and wait for about 10 mins
-plug the fans back in and turn the jtag on.
-Screen should play fine.
STEP 8- Buy a heat gun (home depot or something)
-For about a half of an hour, have the heat gun on and evenly blowing over the motherboard WITHOUT the Heatsinks on.
-After, turn your jtag off and wait till it is COMPLETELY COOL
-Run it to see if the screen turn on.

REFLASHING YOUR NAND:
-Find your GOOD copy of your NAND (first dump)
-Get a USB drive and ROOT(not in any folders) of the USB
-Plug the USB into the jtag and boot into Xell with the DVD drive button
-When the screen says "Update Complete. Remove Update and Power Cycle", take out the USB and turn your jtag off then back on
-Play a game

Hope this helped if you have any questions feel free to PM me!

Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?

Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?[/quote]

If the NAND you flash it with is good, then yes. I used my original NAND and got my controllers working again.

TAH4TxC4RB0N wrote Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?

If the NAND you flash it with is good, then yes. I used my original NAND and got my controllers working again.[/quote]
OK i turned the xbox on, with the usb with the nand on it. its the original nand too.
The disc tray is open, but yet nothing is happening

HIDDENKILLER wrote

TAH4TxC4RB0N wrote Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?

If the NAND you flash it with is good, then yes. I used my original NAND and got my controllers working again.

OK i turned the xbox on, with the usb with the nand on it. its the original nand too.
The disc tray is open, but yet nothing is happening
[/quote]

Did you fix the screen error?

TAH4TxC4RB0N wrote

HIDDENKILLER wrote

TAH4TxC4RB0N wrote Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?

If the NAND you flash it with is good, then yes. I used my original NAND and got my controllers working again.

OK i turned the xbox on, with the usb with the nand on it. its the original nand too.
The disc tray is open, but yet nothing is happening

Did you fix the screen error?[/quote]
no. i cant. i dont live in america, i live in australia and i cant get one of those things, is there a way that i can fix it another way. plus i dont know whether its had red rings

TAH4TxC4RB0N wrote

HIDDENKILLER wrote

TAH4TxC4RB0N wrote Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?

If the NAND you flash it with is good, then yes. I used my original NAND and got my controllers working again.

OK i turned the xbox on, with the usb with the nand on it. its the original nand too.
The disc tray is open, but yet nothing is happening

Did you fix the screen error?[/quote]


Plus i am not that good with it, i bought it previously jtagged, so i dont know anything about opening it.

HIDDENKILLER wrote

TAH4TxC4RB0N wrote

HIDDENKILLER wrote

TAH4TxC4RB0N wrote Thanks man, but i cant connect a Controller to the xbox either, so will that fix it?

If the NAND you flash it with is good, then yes. I used my original NAND and got my controllers working again.

OK i turned the xbox on, with the usb with the nand on it. its the original nand too.
The disc tray is open, but yet nothing is happening

Did you fix the screen error?

It's quite easy to open. Look it up on google or something and once you are inside it's very self explanatory. Sorry I can't help more but I'm on an iPod right now so...


Plus i am not that good with it, i bought it previously jtagged, so i dont know anything about opening it.[/quote]

dont flash to original nand itll unjtag your xbox and youll have to build an lpt cable or usb/spi and plug it into the computer and reflash

OCT0PUSCRIME wrote dont flash to original nand itll unjtag your xbox and youll have to build an lpt cable or usb/spi and plug it into the computer and reflash

Oh ok. um well. i have the jtagged one.
I just need to be able to host lobby's please help :'(