You may have to have it repaired.

Do not send it to M$,it will not be sent back.

Try the sellers in the marketplace,they repair them for a cost.

Do you know an solution without sending it off?

Well the only easily repairable method would be this,

I'm not saying it works,but on my old Xenon,when I got an error,taking out the disk,taking out all cords,blow into all the air holes.

Sometimes dust can actually cause the 3 red rings to come up.

Another may be over heating,leave it for a few hours,or maybe over night without turning it on again,

If it is still not working after doing this,you may need to send it away.

Ask the people who repair them about it and see what they think,ask around for the best evaluation and pricing.

Hope this helps.

TTG-Patobo wrote Well the only easily repairable method would be this,

I'm not saying it works,but on my old Xenon,when I got an error,taking out the disk,taking out all cords,blow into all the air holes.

Sometimes dust can actually cause the 3 red rings to come up.

Another may be over heating,leave it for a few hours,or maybe over night without turning it on again,

If it is still not working after doing this,you may need to send it away.

Ask the people who repair them about it and see what they think,ask around for the best evaluation and pricing.

Hope this helps.

I looked it up and this is what it says...The Xbox doesnt know whats wrong it freezes after showing the first digit(0) of the error code.Might be a cold solder joint somewhere under the GPU as someone fixed it with the X-Clamp replacement, might also be scaler or Southbridge related since this is where the error code is calculated.. Ive heard of leaving it on and letting it get super hot and cut it off and let it cool and sometimes a fix...

I think that may be best left to the guys who fix them,as messing with the solders will un-Jtag it,so you would have to pay for it to be Jtagged and fixed if it fails.

Also,heating you xbox will cause it huge problems,I can't see that working bro,it will un-solder other solders and also mess with the chips and Motherboard.

Yep, you will need to send it off for a proper Reflow. You can try to re adjust the bolts as I'm sure the Jtag has been refurbished and has the bolt kit.

If you need some more assistance, let me know.

-360RepairKings Google it..

nitz0 wrote Yep, you will need to send it off for a proper Reflow. You can try to re adjust the bolts as I'm sure the Jtag has been refurbished and has the bolt kit.

If you need some more assistance, let me know.

-360RepairKings Google it..

Here is the guy who jtagged it [ Register or Signin to view external links. ] He also fixed a no video problem. But when i got it back it was banned when before i sent it i knew it wasnt banned. Then after a few days later the video quit working so i dont konw if its not a proper jtag or he did a bad job or what ?

Wow, I could have told you he was a joke...Look at his website, free webs account...Generic and cheap..

Mine, google 360RepairKings

That is what professional page looks like..

Seems he is just offering crappy services/units and stealing peoples KV's to resell them!

If you need further assitance, PM me..

you can try blocking the fans with 2 qtips in the back of console then power on til you see only 2 Red lights. after that just unplug and plug back in then try to boot