Sunkist wrote

xColorado880 wrote

Sunkist wrote

Streamah wrote

Sunkist wrote 3rrod and Yea I dont Have a back up NAND Or CPU

Well first, you'll definitely have to solder an lpt/nand reader to the mobo.. then your going to have to re construct a nand for your console then flash it to it.

Kinda difficult process, i recommend you send your console to someone who specializes in these kinda fixes.

Yea im Soldering to it This Week .. When I do DO i have to re Dump it and Then What ...

How can I Get The CPU Keys...

Well if you don't have a NAND backup already, its going to take some work.

If you do, just flash back an old image

If you dont, write xell to the xbox. Get the CPU key and use bincrypt to make a 0.032 image.

Dumping the NAND wont be good because the image on there is bad.

So Just Plug in to my PC .. LPT

Then Just Flash Xell ...
can I use a Program to help me like JTAG TOOL ?

Yes, you can use Jtag tool.

In order to make the image, you will need Bincrypt. swifteh has a post with it all somewhere

This is a very helpful post

LAST Question Before I start My Soldering ...




There Is One Picture That Says Solder here...
[ Register or Signin to view external links. ]

And another one That Says I had to solder to the Back?


[ Register or Signin to view external links. ]


Yea Im on a Zephyr JTAG ...

Its the same point really. Doesn't matter which one you use.

I saw somewhere that you would need a fat32 harddrive, is that just a normal xbox harddrive opr do you have to configure it a certain way, I have two harddrives that came with the older xboxs laying around waiting for the jtag

When I run custom DLC for Fallout 3, my console restarts when I leave the area. Halp?

-DRiTZ- wrote I saw somewhere that you would need a fat32 harddrive, is that just a normal xbox harddrive opr do you have to configure it a certain way, I have two harddrives that came with the older xboxs laying around waiting for the jtag

all xbox HDD's are already formatted to fat32 you only need to format usb's or external hardrive's and most of the time there already fat32

my usb cant be detected in xex menu or free style dash after i updated the kernel to the kinect dashboard and installed dashlaunch on my falcon jtag HELP! my usb IS formatted as FAT32 or something like that and can be detected in the memory section in the system settings but not in anywhere else!!!

-Knife- wrote my usb cant be detected in xex menu or free style dash after i updated the kernel to the kinect dashboard and installed dashlaunch on my falcon jtag HELP! my usb IS formatted as FAT32 or something like that and can be detected in the memory section in the system settings but not in anywhere else!!!

Uhhhhh... I'm not an expert with USB's or anything, but what i'd recommend is trying another usb or configuring the usb to the xbox 360 then seeing if it gets picked up by xex menu.

Also try other ports on the console.

thanks, i configured it on the console and it worked it wasnt that my usb ports wer broken (thankfully) thnks.