I have a jtaggable falcon that im gonna jtag, or get JTAG-GALORE to jtag for me, i havent decided yet We should do it together like talk to each other on aim while were doing it

Ahh Jtag it ... You'll make some extra cash on the side... Its a nice thing to have.

yes.

soldering's easy to fix. just reheat it and remove or move the solder.

hope it goes well.

:stupid: exactly haha. Soldering aint bad at all
Of course ull mess up a couple times
I would practice on something just trying to get that perfect pyramid though
Good Luck

Yeah sure, when you use ltp just hope you don't have a BB jasper.....lol
No, use lpt and just make sure you know your commands real good too, it seems to be less trouble using CMD then using jtag tool. Just takes longer.

Just cut the ends off of some resistors and solder them to the ends of your wired first, this makes it alot easier, all you got to do after you solder the end on your wires is hold the end that you soldered over the solder points on the mother board and heat up the solder on the board and they will sink in the holes, makes it easy and no mess.....

yes.. defiantly jtag it!

This shouldn't even be a question brought up, obvisiouly you should JTAG it.

homegrownjeff wrote Yeah sure, when you use ltp just hope you don't have a BB jasper.....lol
No, use lpt and just make sure you know your commands real good too, it seems to be less trouble using CMD then using jtag tool. Just takes longer.

Thanks for the tips ;)
I just need to get the stuff, my taggable is comming on Tuesday, going to get the stuff on Monday

--Classic-- wrote This shouldn't even be a question brought up, obvisiouly you should JTAG it.

I also wanted som tips on howto do it

TTG__Milf wrote

--Classic-- wrote This shouldn't even be a question brought up, obvisiouly you should JTAG it.

I also wanted som tips on howto do it

Just cut the ends off of some resistors and solder them to the ends of your wired first, this makes it alot easier, all you got to do after you solder the end on your wires is hold the end that you soldered over the solder points on the mother board and heat up the solder on the board and they will sink in the holes, makes it easy and no mess.....

Make sure to use AUD_Clamp SMC settins, seems to make jtag's run a little less trouble free