iPatobo wrote Who did you buy it from?

And the freezer technique is rumored to work,but too long and it will mess with your console and especially the solder if any melted.

I'd ask someone more qualified to answer that,like someone who does professional repairs,such as Icy-Tank or nizo

ermm -PCP008-
and also just this second it got 4 red rings ?

First of all what error code pops up?

Never heard of him.

If he continues to ignore you contact TTG staff and have them contact him for you/report him.

Did you by any chance hit the sync button?

oh no i fixed it , its now got the 3 red rings again

iPatobo wrote Never heard of him.

If he continues to ignore you contact TTG staff and have them contact him for you/report him.

Did you by any chance hit the sync button?

ok look him up on the TTG user list ,
ok i will ,
erm yes to connect my controller?

...Right lol

You really need to find your secondary error code.

You know how to do that?

Edit: Pressing the sync button while on RROD is the way to get your secondary error code and the red rings will change in order to give you your error code.

iPatobo wrote ...Right lol

You really need to find your secondary error code.

You know how to do that?

no sorry , how do i do that ?

well i might be late with this but if your game's wont read. you cant copy a game to xex menu it means you got to flash your disk drive. i wont help because i will not be blamed for what happens to your jtag. but like the jtag

TheUglySod wrote

iPatobo wrote ...Right lol

You really need to find your secondary error code.

You know how to do that?

no sorry , how do i do that ?

Here read this.


The specific type of hardware failure can be determined by a "hidden" error code
Turn the xbox 360 on, and wait till the 3 red lights are flashing.
Press and hold the sync up button (the small white one), while holding that button press the eject button.
The LEDs will now blink the first number in the code (as described below).
Release the eject button and press it again.
The LEDs will now blink the second number of the code.
Release the eject button and press it again.
The LEDs will now blink the third number of the code.
Release the eject button and press it again.
The LEDs will now blink the forth number of the code.
Release the eject button and press it again.
The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:
All four lights flashing - 0
One light flashing - 1
Two Lights flashing - 2
Three lights flashing - 3

iPatobo wrote

TheUglySod wrote

iPatobo wrote ...Right lol

You really need to find your secondary error code.

You know how to do that?

no sorry , how do i do that ?

Here read this.


The specific type of hardware failure can be determined by a "hidden" error code
Turn the xbox 360 on, and wait till the 3 red lights are flashing.
Press and hold the sync up button (the small white one), while holding that button press the eject button.
The LEDs will now blink the first number in the code (as described below).
Release the eject button and press it again.
The LEDs will now blink the second number of the code.
Release the eject button and press it again.
The LEDs will now blink the third number of the code.
Release the eject button and press it again.
The LEDs will now blink the forth number of the code.
Release the eject button and press it again.
The LEDs will go back to the 3 red flashing lights.
You should be able to determine the difference between the 3 flashing lights and the error code lights by the rate in which they flash.

Here is how you interpret the LEDs to get the code number:
All four lights flashing - 0
One light flashing - 1
Two Lights flashing - 2
Three lights flashing - 3

i realy dont get that sorry , i tried though