#1 you are getting open tray error, you put in the game and it says reading...open tray over and over.

#2 open your console

#3 pull your dvd tray out and unscrew the case. if you want to be able to test without replacing the lid, peel back the sticker on top and twist the magnet apart in a counter clockwise motion, then place it back together. you can set this ontop as i did in my video.

#4 take note of the 2 screws directly on the back of the laser eye. looking directly down at the dvd rom, 1 one the left and 1 on the right. the 1 you need to adjust is the 1 on the right.

#5 turn the screw on the right just a quarter of a turn, thats it.

#6 replace the game and set your magnet down ontop. power on the console and watch the game spin and boot. once it is operating again power down your console and replace the magnet in the dvd lid. put your dvd case back together, install the screws, and reconstruct your console.

now if for some reason this did not work you can adjust it a little more, what you are doing is setting the voltage a little higher, if you feel maybe you didn't turn it enough and its not working you probably didn't, so feel free to adjust a little at a time and test each time.