Try refitting the clamps and turning it again

Make sure you heat gun is on the right settings when you perform your reflow also if this dose not work have some one do a pro reball on it.

ram work is no that easy to fix.

Also try reflowing the hana chip

you can also reflow the cpu that might also work
pro reball recommended.


thanks

you have too shut down and turn on computer.
if that doesnt work heres this free security scanner
[ Register or Signin to view external links. ]
thank you. +rep or gift gold if i helped

Try with new hardware. Maybe it's the Xclamps, Try going to the hardware store & getting washers & screws .. Should work.

Im sorry to tell you this, but since you reflowed it multiple times and have also applied new thermal paste, there is not much left to do...You can try messing with the fans, or you can even overheat the xbox to re-sodder itself. That has fixed my 0022 problem before. I hope i helped

Well try what you did again and if it still doesnt work call microsoft and see if there is warranty also go on yahoo answers and tech forums you will find solutions there.

GPU error/ overheating

Your Gaming Processing Unit is acting up. The site listed has some suggestions for how to fix it
Source(s):
[ Register or Signin to view external links. ]

Hope I helped

You may want to try overheating it for five minutes a few times.

Are you using too much compound?

well for 0110 error though it's most likely GPU related literally means the console does not know what is wrong. possibly a short or cold solder joint somewhere. So far there is 1 major theory for what causes most of these errors is that the Ram, CPU, or GPU are not soldered properly to the mother board due either to poor manufacturing or excessive heat up and cool down cycles that stress, weaken and eventually break the soldered connection.
There are two theories to fixing this one deals with the "X" clamps that hold down the chips. The other involves re-Heating the chips. DO NOT attempt either of these if your console is still under warranty. If your console is still under warranty return it to the store where it was purchased or call MS to have it replaced. I have also heard of limited success by simply switching the AV cable from "HDTV" mode to "TV" mode.
And for 0020 well thats a GPU error
*I did copy and paste it from the sticky*
Hope i helped

Forums/t=976795/how-to-fix-most-x...codes.html