You are viewing our Forum Archives. To view or take place in current topics click here.
Help with Bricked jtag
Posted:
Help with Bricked jtagPosted:
Status: Offline
Joined: Dec 29, 201013Year Member
Posts: 7
Reputation Power: 0
Status: Offline
Joined: Dec 29, 201013Year Member
Posts: 7
Reputation Power: 0
Okay i got a xenon jtag but its bricked it worked for about 2 weeks but 1 day when i started it up it was black screen. so i tried to load xell. but it didnt work. now when i turn on my jtag i get black screen and when i try to run xell it is black screen. And it also has 3 red rings after 15 seconds. i did the qtip trick but it didnt work. i got some instructions: Flash Xell, Use Bincrypt, make new doner NAND, Flash new doner, And spoof dvd drive. i have looked up how to do step 1 and cant find it. Will some1 please try and help me. if all fails i will just sell it for $75. message me if u can help or want it by PM or AIM: (iHyperSniper) Thank you PS. i have webcam for proof
Last edited by iHyperSniper ; edited 1 time in total
Last edited by iHyperSniper ; edited 1 time in total
#2. Posted:
Status: Offline
Joined: Aug 23, 201014Year Member
Posts: 1,606
Reputation Power: 73
Status: Offline
Joined: Aug 23, 201014Year Member
Posts: 1,606
Reputation Power: 73
If xell wont boot there it need a re-flow.
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Sep 05, 201014Year Member
Posts: 516
Reputation Power: 20
Status: Offline
Joined: Sep 05, 201014Year Member
Posts: 516
Reputation Power: 20
you may need to make an lpt cable or you can send it of to Slapah0 he lives in us and can get it fixed chat to him on here sorry about your console
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Sep 05, 201014Year Member
Posts: 3,218
Reputation Power: 209
Status: Offline
Joined: Sep 05, 201014Year Member
Posts: 3,218
Reputation Power: 209
1st off,your console is not bricked.
If it was bricked it will never work,or boot or display anything at all.
For installing Xellous use this tutorial,
Found here: Forums/t=127121/the-jtag-tutorial-thread.html
How To Install Xell
Xell is used to grab your CPU Key for your console. Which is a good thing to have in case you need to open your KV. Install Xell is easy and takes little to now time.
Download the image for your motherboard revision. Extract and place it in the nandpro folder. Make it easy on yourself and rename the Xell file to Xell
With your LPT cable and everything still set up. You will be using nandpro again. So here we go again.
1. Click start
2. Click run
3. Type CMD
4. Type the command.
Code:
C:Nandpro20bnandpro.exe lpt: -w16 Xell.bin
Don't worry about the file size. It is meant to only write to the beginning of your NAND flash.
5. Click enter and it should starting writing.
6. Once it is done writing. Unplug the lpt cable from the PC and turn on the 360. It should boot into a blue screen. If it does then you did it right.
Getting the CPU key.
Have a camera ready to take a picture of the Fuse Set's that pop up briefly.
Take a picture that includes fuse set 3,4,5,and 6. These contain your CPU key.
Take either 3 and 5 or 4 and 6. This will make up your cpu key. 3=4 5=6 So for example. I will take 3 and 5.
3= E42D681ED06A6D1C
5= 1FFD8E48C56A2058
So my CPU Key is - E42D681ED06A6D1C1FFD8E48C56A2058
Adding either one of the two will make your CPU key.
After getting your cpu key you can write your original nand image back to the board. Or go straight forward and install XBReboot or freeBOOT.
To flash your nand image back on, use this command
Code:
C:NandPro20bnandpro.exe lpt: -w16 (name of your nand backup)
You'd have to get a donor NAND from someone,ask around I'm sure someone can supply one.
Then you'd have to flash the new nand to the console via Xellous.
If you don't know how to do that,then you should either sell it or send it to Nitz0 or Icy-Tank to repair it for you.
Also,has your console any error message at all?
E79 maybe? or E74?
If it was bricked it will never work,or boot or display anything at all.
For installing Xellous use this tutorial,
Found here: Forums/t=127121/the-jtag-tutorial-thread.html
How To Install Xell
Xell is used to grab your CPU Key for your console. Which is a good thing to have in case you need to open your KV. Install Xell is easy and takes little to now time.
Download the image for your motherboard revision. Extract and place it in the nandpro folder. Make it easy on yourself and rename the Xell file to Xell
With your LPT cable and everything still set up. You will be using nandpro again. So here we go again.
1. Click start
2. Click run
3. Type CMD
4. Type the command.
Code:
C:Nandpro20bnandpro.exe lpt: -w16 Xell.bin
Don't worry about the file size. It is meant to only write to the beginning of your NAND flash.
5. Click enter and it should starting writing.
6. Once it is done writing. Unplug the lpt cable from the PC and turn on the 360. It should boot into a blue screen. If it does then you did it right.
Getting the CPU key.
Have a camera ready to take a picture of the Fuse Set's that pop up briefly.
Take a picture that includes fuse set 3,4,5,and 6. These contain your CPU key.
Take either 3 and 5 or 4 and 6. This will make up your cpu key. 3=4 5=6 So for example. I will take 3 and 5.
3= E42D681ED06A6D1C
5= 1FFD8E48C56A2058
So my CPU Key is - E42D681ED06A6D1C1FFD8E48C56A2058
Adding either one of the two will make your CPU key.
After getting your cpu key you can write your original nand image back to the board. Or go straight forward and install XBReboot or freeBOOT.
To flash your nand image back on, use this command
Code:
C:NandPro20bnandpro.exe lpt: -w16 (name of your nand backup)
You'd have to get a donor NAND from someone,ask around I'm sure someone can supply one.
Then you'd have to flash the new nand to the console via Xellous.
If you don't know how to do that,then you should either sell it or send it to Nitz0 or Icy-Tank to repair it for you.
Also,has your console any error message at all?
E79 maybe? or E74?
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.