Hey dude, i need help resoldering these wires for the "power port" or whatever you want to call it. All i need to know is which wire goes where.

pictures to show you
[spoiler] [ Register or Signin to view external links. ]
another
[ Register or Signin to view external links. ] [/spoiler]

kakkman wrote Hey dude, i need help resoldering these wires for the "power port" or whatever you want to call it. All i need to know is which wire goes where.

pictures to show you
[spoiler] [ Register or Signin to view external links. ]
another
[ Register or Signin to view external links. ] [/spoiler]

I actually didn't know the answer to your question... so I did the only reasonable thing I could... I ripped apart a 360 PSU...

The top 2 wires should be red... they go in the spots labeled 7 and 8 on the board.

The middle 3 should be yellow, and they go into spots 4, 5, and 6 (even though 5 isn't labeled it's the one in between 4 and 6...lol

The bottom 3 are the black ground wires... they go into 1, 2, and 3... (and I know there's no #1.. it's the dot...

Hope that helps!

Here are some pics for reference...



[ Register or Signin to view external links. ]

[ Register or Signin to view external links. ]

My JTAG was 'Bricked' and apparently I need to re-flash, how is this done?

Azraelrs wrote

kakkman wrote Hey dude, i need help resoldering these wires for the "power port" or whatever you want to call it. All i need to know is which wire goes where.

pictures to show you

I actually didn't know the answer to your question... so I did the only reasonable thing I could... I ripped apart a 360 PSU...

The top 2 wires should be red... they go in the spots labeled 7 and 8 on the board.

The middle 3 should be yellow, and they go into spots 4, 5, and 6 (even though 5 isn't labeled it's the one in between 4 and 6...lol

The bottom 3 are the black ground wires... they go into 1, 2, and 3... (and I know there's no #1.. it's the dot...

Hope that helps!

im sorry but how many wires does yours have? mine only has 4 different ones, 2 of which i dont know where they go, (the ones sticking up in my picture)

NinjaDefuse wrote My JTAG was 'Bricked' and apparently I need to re-flash, how is this done?

I don't do JTAGs... I have no need to destroy a perfectly good 360.

kakkman wrote

Azraelrs wrote

kakkman wrote Hey dude, i need help resoldering these wires for the "power port" or whatever you want to call it. All i need to know is which wire goes where.

pictures to show you

I actually didn't know the answer to your question... so I did the only reasonable thing I could... I ripped apart a 360 PSU...

The top 2 wires should be red... they go in the spots labeled 7 and 8 on the board.

The middle 3 should be yellow, and they go into spots 4, 5, and 6 (even though 5 isn't labeled it's the one in between 4 and 6...lol

The bottom 3 are the black ground wires... they go into 1, 2, and 3... (and I know there's no #1.. it's the dot...

Hope that helps!

im sorry but how many wires does yours have? mine only has 4 different ones, 2 of which i dont know where they go, (the ones sticking up in my picture)

Umm, actually there should have been no wires, just metal connections. So I listed what you should have to rewire it. You should have 7-8 connections. (Sometimes #8 (a red one)isn't there)

The power port is not broken only detached. I just need to know where to solder the wires to the board to use my jtag once more

Xbox 1: Doesn't have Video//Audio, people told me to reflow HANA/GPU But I don't know how it's done..

Xbox 2: Freezes on start up.

Midview13 wrote Xbox 1: Doesn't have Video//Audio, people told me to reflow HANA/GPU But I don't know how it's done..

Xbox 2: Freezes on start up.

People are close on that one. If you have no video BUT you have audio, then you would need to reflow those chips. But no audio AND no video is maybe the AV port itself.

Xbox 2: That is a RAM and GPU reflow.

kakkman wrote The power port is not broken only detached. I just need to know where to solder the wires to the board to use my jtag once more

I gave you pictures to show you how and where the wires needed to be soldered. Description of what wires go where. I don't know what else I can do... And it had to have been broken because stock PSU don't have an wires, so someone has already tried to work with it.