Not to be a dick, but it looks like you spray painted it without taking it apart. Looks like it fell into a vat of cherry syrup.

hahahha
you did that with sharpe

Editz wrote I think i have been spamming a bit so i made our forum where we will post our designs,
Here is a controller that was done by me and my dad.( i painted it so dont mind that lol)

<a></a>
<a></a>
<a></a>
<a></a>

Is that marker

Looks alright but I have to agree with the other guy, we can tell you haven't taken it apart and sprayed it.

Just dropped it in cherry paint.

TTG_SaaaM wrote hahahha
you did that with sharpe

lol

k well didnt have a torx t8 and i looked for one ALL DAY and none fit the screw so the whole torx t8 thing is a lie xbox makes there own custom screws and then we have to tape off the controller and spray paint it, and if it was dropped in cherry paint why wouldnt the buttons and what not be cherry?

and its actually a porfessional PAINT MARKER not a sharpie, sharpies dont work properly

I paint controllers, and this isn't a very professional job.

For wireless controllers, I can unscrew the Torx screws with a small flathead screwdriver.

Also, you need to put a few coats of clear-coat paint to protect the controller. If not, the paint will rub off after a few uses.

Try practicing on wired controllers when you start; they are easier to assemble and they don't use Torx screws, they use Phillips.

Good first attempt, though.

yeh u defo need to take off the front panel thing... the paint is on the buttons and the thumbsticks...

The designs look like a sharpie (regardless) thats just been randomly swirled and dotted...

6/10 if its your first try xD