You are viewing our Forum Archives. To view or take place in current topics click here.
Rapid Fire|LED Swap|LED Thumbsticks|Rumble| TUT|More Soon!
Posted:
Rapid Fire|LED Swap|LED Thumbsticks|Rumble| TUT|More Soon!Posted:
Status: Offline
Joined: May 03, 201113Year Member
Posts: 3,845
Reputation Power: 251
Status: Offline
Joined: May 03, 201113Year Member
Posts: 3,845
Reputation Power: 251
Ultimate Controller Mod Thread!
Info:
Table of Contents:
*Board Differential
*Supplies
*Taking Apart the Controller
*Rapid Fire(Cg/Cg2)
*Rapid Fire(Matrix)
*LED Swap
*LED Thumbsticks [ Register or Signin to view external links. ]
*LED Guide Button [ Register or Signin to view external links. ]
*LED Rumble Activated [ Register or Signin to view external links. ]
Board Differential:
Matrix:
CG:
CG2:
Info on the boards:
Supplies:
You will be needing some supplies along this journey-->
Taking Apart the Controller:
Supplies Needed:
This part is showing you how to take apart your controller! You will need to find the 7 screws to unscrew.
After use your flathead to pry open the top and bottom. After that you can pull apart the bottom and everything else comes out!
Video Tut-
Rapid Fire Install(Cg/CG2)
If you have a CG/Cg2 board and using the chip from JC Controllers Refer to this diagram-
If you do not have one from JC then your seller should give you one!
Supplies Needed:
Wiring the Chip-
Pictures of finished wiring-
Testing Wiring-
Testing In Game-
Rapid Fire Install(Matrix)
Supplies Needed:
Diagram-
Video-
LED Swap:
Supplies Needed:
To swap LEDs you take off the stock(Green) LED and replace it with a new one(Usually a different color).
LED Polarity Reference-
LED Swap TUT-
Finished Product(#4 Player was left to differentiate the mode LED for rapid fire)
LED Thumbsticks
Supplies Needed:
Here is a diagram for the LED's power-
Video-
Final Product-
LED Guide Button:
Supplies Needed:
This mod is the same diagram as LED thumbsticks. Same LEDs and same points.
Only thing that is different is that you have to drill out the center of the button to place an LED
Video-
Rumble Activated LED's
Supplies Needed:
Video-
Hope you enjoyed our guide! The Videos from: Matrix, LED Thumbsticks, LED guide button, Rumble LEDs were doing from my boys from JustCustomizations. I give all the credit to them for helping me with this post. If you ever need supplies i used from here they sell it all
Here is their shop-JustCustomizations Shop
If need anything feel free to PM me. If you have a suggestion drop a comment. Other then that. Please enjoi :coffee:
Info:
In this thread i am going to show you many controller mods that are up to date. The newest way to mod a controller is to use a programmed chip. Not some random wiring. We show you this method. Also LED swapping on the ROL. We are going to be incorporating LED thumbsticks too.
Table of Contents:
*Board Differential
*Supplies
*Taking Apart the Controller
*Rapid Fire(Cg/Cg2)
*Rapid Fire(Matrix)
*LED Swap
*LED Thumbsticks [ Register or Signin to view external links. ]
*LED Guide Button [ Register or Signin to view external links. ]
*LED Rumble Activated [ Register or Signin to view external links. ]
Board Differential:
Matrix:
CG:
CG2:
Info on the boards:
You can tell the difference between the boards by the small capacitor in the bottom left hand corner of the controller board shown in the pictures.Matrix is the older type of board. Harder to mod To mod them you need resistors and everything. CG and CG2 are the same diagram for modding. They are wire and chip. No resistors making it easier. Also the different boards have different LED polarity.
Supplies:
You will be needing some supplies along this journey-->
-Torx T8 Security
-Soldering Iron
-Solder
-Flux(Optional)
-Mod Chip
-Controller
-Diagram
-Kynar Wire
-Soldering Iron
-Solder
-Flux(Optional)
-Mod Chip
-Controller
-Diagram
-Kynar Wire
Taking Apart the Controller:
Supplies Needed:
Torx T8 Security
Flat Head
Flat Head
This part is showing you how to take apart your controller! You will need to find the 7 screws to unscrew.
After use your flathead to pry open the top and bottom. After that you can pull apart the bottom and everything else comes out!
Video Tut-
Rapid Fire Install(Cg/CG2)
If you have a CG/Cg2 board and using the chip from JC Controllers Refer to this diagram-
If you do not have one from JC then your seller should give you one!
Supplies Needed:
Soldering Iron
Solder
Chip
Diagram
Controller
Solder
Chip
Diagram
Controller
Wiring the Chip-
Pictures of finished wiring-
Testing Wiring-
Testing In Game-
Rapid Fire Install(Matrix)
Supplies Needed:
Soldering Iron
Solder
Chip
Diagram
2x 330 ohm resistors
1k ohm resistor
1n418 diode
wire
Solder
Chip
Diagram
2x 330 ohm resistors
1k ohm resistor
1n418 diode
wire
Diagram-
Video-
LED Swap:
Supplies Needed:
Soldering Iron
Solder
Diagram
0603 SMD LED
Magnetic Screwdriver(Optional)
Solder
Diagram
0603 SMD LED
Magnetic Screwdriver(Optional)
To swap LEDs you take off the stock(Green) LED and replace it with a new one(Usually a different color).
LED Polarity Reference-
LED Swap TUT-
Finished Product(#4 Player was left to differentiate the mode LED for rapid fire)
LED Thumbsticks
Supplies Needed:
3mm LEDs
Wire
Diagram
Clear Thumbsticks
Hot Glue
Wire
Diagram
Clear Thumbsticks
Hot Glue
Here is a diagram for the LED's power-
Video-
Final Product-
LED Guide Button:
Supplies Needed:
Soldering Iron
Solder
Dremel/Drill
3mm LED
Hot Glue
Diagram
Solder
Dremel/Drill
3mm LED
Hot Glue
Diagram
This mod is the same diagram as LED thumbsticks. Same LEDs and same points.
Only thing that is different is that you have to drill out the center of the button to place an LED
Video-
Rumble Activated LED's
Supplies Needed:
3mm leds
soldering iron
solder
wire
soldering iron
solder
wire
Video-
Hope you enjoyed our guide! The Videos from: Matrix, LED Thumbsticks, LED guide button, Rumble LEDs were doing from my boys from JustCustomizations. I give all the credit to them for helping me with this post. If you ever need supplies i used from here they sell it all
Here is their shop-JustCustomizations Shop
If need anything feel free to PM me. If you have a suggestion drop a comment. Other then that. Please enjoi :coffee:
The following 12 users thanked SeaEye for this useful post:
TTG_Fighop (07-27-2012), DynamicBomb (06-16-2012), MrModz1999_Lobbies (06-14-2012), XWithDrawlsX (05-11-2012), Explosivez (04-03-2012), RUSH0814 (04-01-2012), Requirement (03-30-2012), Carlooch (03-28-2012), Ers (03-25-2012), Listening (03-16-2012), Soothe_Customs (03-16-2012), Esa (03-16-2012)
#2. Posted:
Status: Offline
Joined: Jan 15, 201212Year Member
Posts: 488
Reputation Power: 5
Status: Offline
Joined: Jan 15, 201212Year Member
Posts: 488
Reputation Power: 5
Yayyyyyyyy! Stickied again!
Great post, if any one every needs a controller, controller parts, or supplys PM me!
Last edited by Soothe_Customs ; edited 2 times in total
Great post, if any one every needs a controller, controller parts, or supplys PM me!
Last edited by Soothe_Customs ; edited 2 times in total
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Sep 08, 201014Year Member
Posts: 1,496
Reputation Power: 11
Great tutorial bro. Definitely sticky worth.
You have my vouche,!
#GreatPosting<3
-Make
You have my vouche,!
#GreatPosting<3
-Make
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Mar 22, 201113Year Member
Posts: 2,614
Reputation Power: 119
Status: Offline
Joined: Mar 22, 201113Year Member
Posts: 2,614
Reputation Power: 119
Yay restickied! I was like WTF, before lol anyways feel free to request tuts!
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: Dec 30, 201112Year Member
Posts: 573
Reputation Power: 23
Status: Offline
Joined: Dec 30, 201112Year Member
Posts: 573
Reputation Power: 23
Hard work deserves thanks
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: Jun 14, 200915Year Member
Posts: 1,956
Reputation Power: 89
Status: Offline
Joined: Jun 14, 200915Year Member
Posts: 1,956
Reputation Power: 89
Nice tutorial Sea Eye..
- 0useful
- 0not useful
#7. Posted:
Status: Offline
Joined: Jun 05, 201014Year Member
Posts: 380
Reputation Power: 15
Status: Offline
Joined: Jun 05, 201014Year Member
Posts: 380
Reputation Power: 15
Amazing Post Bro Thanks So Much I Will Definetly Use This Tut
- 0useful
- 0not useful
#8. Posted:
Status: Offline
Joined: May 03, 201113Year Member
Posts: 3,845
Reputation Power: 251
Status: Offline
Joined: May 03, 201113Year Member
Posts: 3,845
Reputation Power: 251
matt238 wrote watch out this seems like a scam !
Too bad im not selling anything :|
So how would i be scamming.
Thank you.
- 2useful
- 1not useful
#9. Posted:
Status: Offline
Joined: Dec 11, 201014Year Member
Posts: 2,509
Reputation Power: 133
Status: Offline
Joined: Dec 11, 201014Year Member
Posts: 2,509
Reputation Power: 133
GREAT post sea eye you better hook me up with controller ;)
- 0useful
- 0not useful
#10. Posted:
Status: Offline
Joined: Jan 10, 201113Year Member
Posts: 1,140
Reputation Power: 52
Status: Offline
Joined: Jan 10, 201113Year Member
Posts: 1,140
Reputation Power: 52
AMAZING Post!
Just finished installing a Rapid Fire mod into my controller.
Really Helpful. Thanks
Just finished installing a Rapid Fire mod into my controller.
Really Helpful. Thanks
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.