1.What motherboard Jasper
2.RGH or Jtag RGH
3. What seems to be the problem ? I tried to install xell and I accidently booted it from the default .xex and it gave e79 error ( I didn't know I had it installed already)
4. What physical errors are you seeing? e79 1 rrod
5. Do you have your OG Nand ? Yes

TTGExplosion wrote 1.What motherboard Jasper
2.RGH or Jtag RGH
3. What seems to be the problem ? I tried to install xell and I accidently booted it from the default .xex and it gave e79 error ( I didn't know I had it installed already)
4. What physical errors are you seeing? e79 1 rrod
5. Do you have your OG Nand ? Yes

You are going to have to send it in for a manul reflash

BoSsLoBbYz wrote

TTGExplosion wrote 1.What motherboard Jasper
2.RGH or Jtag RGH
3. What seems to be the problem ? I tried to install xell and I accidently booted it from the default .xex and it gave e79 error ( I didn't know I had it installed already)
4. What physical errors are you seeing? e79 1 rrod
5. Do you have your OG Nand ? Yes

You are going to have to send it in for a manul reflash

-__________- Thanks for your help

1.What motherboard - Xenon
2.RGH or Jtag - Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) - None
5. Do you have your OG Nand ? - This is what I would like to extract, how can I get it?

TTGExplosion wrote

BoSsLoBbYz wrote

TTGExplosion wrote 1.What motherboard Jasper
2.RGH or Jtag RGH
3. What seems to be the problem ? I tried to install xell and I accidently booted it from the default .xex and it gave e79 error ( I didn't know I had it installed already)
4. What physical errors are you seeing? e79 1 rrod
5. Do you have your OG Nand ? Yes

You are going to have to send it in for a manul reflash

-__________- Thanks for your help

So If I sent it to you, I would get the Nand Reflash Service correct?

countryboss wrote i changed the launch.ini file on my rgh using a FTP program. now my xbox launches in the stock dashboard and i cannot go back into the freestyle dashboard. I tried connecting my hdd into my computer using a connecter that turns the sata to usb but i can only fine my hdd in modio and it will not allow me to see the location i need to put the original launch.ini file back on. How do i connect my hdd so i can change the file back.

Disregard this question. I figured it out. Thanks

I am currentally soldering my nand-x wires to my falcon mother board, And I am having a bit of issues with the yellow wire point.

It seems when I try to heat it up the soldering liquefies but the wire is having a bit of issues sliding in.

Any idea's to solve this issue?

Carlooch you should work for xbox you help out so much

i2obo wrote I am currentally soldering my nand-x wires to my falcon mother board, And I am having a bit of issues with the yellow wire point.

It seems when I try to heat it up the soldering liquefies but the wire is having a bit of issues sliding in.

Any idea's to solve this issue?

Tin the yellow wire abit. Use a little flux on the point and tin it also. As long as your didn't rip the point out, it should just slide right in. If you don't have flux you can get it at radio shack for a few bucks, same flux I use for soldering Jtags/RGH's.

[ Register or Signin to view external links. ]

Carlooch wrote

i2obo wrote I am currentally soldering my nand-x wires to my falcon mother board, And I am having a bit of issues with the yellow wire point.

It seems when I try to heat it up the soldering liquefies but the wire is having a bit of issues sliding in.

Any idea's to solve this issue?

Tin the yellow wire abit. Use a little flux on the point and tin it also. As long as your didn't rip the point out, it should just slide right in. If you don't have flux you can get it at radio shack for a few bucks, same flux I use for soldering Jtags/RGH's.

[ Register or Signin to view external links. ]

The point is fine I made sure I didn't **** it up, I will go ahead and do what you said.
Thanks for the help will update when I am finished.