1.What motherboard:Falcon
2.RGH or Jtag:Jtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)Installed a skin on fsd and it's been frezzing like crazy even before it.Also a 80mm fanmod was installed and Blue LEDS (Got it with the Jtag)
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc) Jtag not showing audio/video and think has a rrod cant tell cause blue leds
5. Do you have your OG Nand ? No sorry

1.What motherboard: Falcon

2.RGH or Jtag: RGH

3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc):

No recent updates, when i play online my tag randomly freezes and i have to reboot.

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

nothing, its always booted slow.

5. Do you have your OG Nand ? yes

1.Xenon
2.Jtag
3. Bad flash, 4 RROD, still powers on just no xell or screen, controller won't connect
4. 4 RROD, no screen
5. Do you have your OG Nand ? Yes

hungoverbruh wrote 1.What motherboard: Falcon

2.RGH or Jtag: RGH

3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc):

No recent updates, when i play online my tag randomly freezes and i have to reboot.

4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)

nothing, its always booted slow.

5. Do you have your OG Nand ? yes

My bet is that you are on a RGH1 Phat console. Falcon or Jasper perhaps?

If so, it's your wiring. If you are comfortable with it open up the console and isolate the wires as far away from each other as possible. Of particular interest is the CPU_RST (D) wire and I would suggest using the underside alternate STBY_CLK (B) wire routed away from everything else.

DOLLARxHD wrote 1.Xenon
2.Jtag
3. Bad flash, 4 RROD, still powers on just no xell or screen, controller won't connect
4. 4 RROD, no screen
5. Do you have your OG Nand ? Yes

You are going to need to flash your Nand via a hardware device. You're going to have to solder a NandX or JRProgrammer (or any SPI Nand programmer) into your console and reflash it with your original nand.

xZephyrs wrote 1.What motherboard Xenon
2.RGH or JtagJtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)No, but I have replaced the old "arctic 5"
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)3 ROD and the secondary error code is 0020
5. Do you have your OG Nand ? yes

0020 is typically GPU related, but can be other things. If it RRODs after about 30 seconds it can be a sign of an LDV mismatch.

Since you just recently changed the thermal paste, a GPU/overheat issue is more likely. If you did an "xclamp mod" where you replaced the Xclamps with bolts or whatever I'd switch back to the Xclamps. you might check that things aren't over tightened and shorting out something on the board.

TheWeekendModder wrote

xZephyrs wrote 1.What motherboard Xenon
2.RGH or JtagJtag
3. What seems to be the problem ? Name anything recent that you have done to you console recently (update nands, etc)No, but I have replaced the old "arctic 5"
4. What physical errors are you seeing (2/3 RROD, RGH not booting, RGH booting slowly, Jtag getting E79,etc)3 ROD and the secondary error code is 0020
5. Do you have your OG Nand ? yes

0020 is typically GPU related, but can be other things. If it RRODs after about 30 seconds it can be a sign of an LDV mismatch.

Since you just recently changed the thermal paste, a GPU/overheat issue is more likely. If you did an "xclamp mod" where you replaced the Xclamps with bolts or whatever I'd switch back to the Xclamps. you might check that things aren't over tightened and shorting out something on the board.

Please Correct me if I am wrong, but isnt 0022 after 25-30 seconds either a Fried CPU or a LDV Mismatch? 0020 is simply your GPU. When you removed the Xclamps, you took the pressure off the GPU, and If you did a Bolt Mod, You most likely tightened one side more than the other. This is very common on Xenon Motherboard. You need to either pay to have it repaired, which may not last (Even a Reball), or upgrade. If you upgrade, Try to find a Falcon or Better.

Hope I helped!

~Sala

Motherboard jasper
Rgh
Problem rgh boots but freezes often and after it freezes it won't boot until I turn it off for like 30 min
Og NAND yes

i hope this helps people out it should because this is a great tread

i actually deleted my bootanim.xex & now i can't get my xbox to even turn on. how do i fix this
i have a RGH Trinity MB Glitch 2 Flashed