You are viewing our Forum Archives. To view or take place in current topics click here.
help! RGH 1.1 Falcon
Posted:
help! RGH 1.1 FalconPosted:
Status: Offline
Joined: May 09, 201212Year Member
Posts: 25
Reputation Power: 0
Status: Offline
Joined: May 09, 201212Year Member
Posts: 25
Reputation Power: 0
okay guys so heres my problem please, feel free to try and answer.
My xbox spec:
Motherboard: Falcon 16mb
Dashboard: 9199 (not taggable but RGH)
XBL:banned
Mods: No previous Modifications.
I got my matrix nand flasher 1.0 and matrix glitcher 1.1 with all extra cables and equipment.
So I used a tut and got everything soldered properly (both flasher and glitcher) i successfully created three nand dumps. I checked the nand dumps and they were all the sae then followed by checking bad blocks on each nand dump... none had bad blocks.
I then used 360 Flash tool and created an image_00000000.ecc which i then wrote into the xbox. But i didnt make a nand kernel i need my cpu key.
Once i'd done that i then carried on with programming the glitcher with "falcon.jed" it went successfully...
So now both the nand and glitcher are done.
I then tried to boot using the normal power button, nothing happened
I tried to boot using the eject button, nothing happened (have no disk drive)
I havent tried booting with a wired controller in the back usb port, getting a controller tomorrow.
But I want to know if i've gone wrong or if this is normal or any ways i can boot into xell to get my key.
Much Appreciated,
-Shady-
My xbox spec:
Motherboard: Falcon 16mb
Dashboard: 9199 (not taggable but RGH)
XBL:banned
Mods: No previous Modifications.
I got my matrix nand flasher 1.0 and matrix glitcher 1.1 with all extra cables and equipment.
So I used a tut and got everything soldered properly (both flasher and glitcher) i successfully created three nand dumps. I checked the nand dumps and they were all the sae then followed by checking bad blocks on each nand dump... none had bad blocks.
I then used 360 Flash tool and created an image_00000000.ecc which i then wrote into the xbox. But i didnt make a nand kernel i need my cpu key.
Once i'd done that i then carried on with programming the glitcher with "falcon.jed" it went successfully...
So now both the nand and glitcher are done.
I then tried to boot using the normal power button, nothing happened
I tried to boot using the eject button, nothing happened (have no disk drive)
I havent tried booting with a wired controller in the back usb port, getting a controller tomorrow.
But I want to know if i've gone wrong or if this is normal or any ways i can boot into xell to get my key.
Much Appreciated,
-Shady-
Last edited by -ShadyModz- ; edited 1 time in total
#2. Posted:
Status: Offline
Joined: Jun 19, 201014Year Member
Posts: 5,070
Reputation Power: 216
Status: Offline
Joined: Jun 19, 201014Year Member
Posts: 5,070
Reputation Power: 216
post images of soldering cant expect anyone to help without them. "Nothing happened" does this mean it didnt turn on or just didnt boot into xell?
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: May 09, 201212Year Member
Posts: 25
Reputation Power: 0
Status: Offline
Joined: May 09, 201212Year Member
Posts: 25
Reputation Power: 0
i cant get images atm have no camera and phone cameras only 2mp so its crap quality.
on the computer it says i have programmed everything but it wont boot xell the xbox is on but theres no input on my tv.
on the computer it says i have programmed everything but it wont boot xell the xbox is on but theres no input on my tv.
- 0useful
- 1not useful
#4. Posted:
Status: Offline
Joined: May 09, 201212Year Member
Posts: 25
Reputation Power: 0
Status: Offline
Joined: May 09, 201212Year Member
Posts: 25
Reputation Power: 0
bump
really need some type of guidance
really need some type of guidance
- 0useful
- 1not useful
You are viewing our Forum Archives. To view or take place in current topics click here.