You are viewing our Forum Archives. To view or take place in current topics click here.
-Mod's Jtag Tutorials!
Posted:
-Mod's Jtag Tutorials!Posted:
Status: Offline
Joined: Jul 09, 201212Year Member
Posts: 375
Reputation Power: 23
Status: Offline
Joined: Jul 09, 201212Year Member
Posts: 375
Reputation Power: 23
First off PLEASE REP AND THANK. This took forever to put together.
TUTORIAL 1.
TUTORIAL 2.
TUTORIAL 3.
TUTORIAL 4.
TUTORIAL 5.
TUTORIAL 6.
TUTORIAL 7.
TUTORIAL 8.
TUTORIAL 9.
[video=youtube]http://www.youtube.com/watch?v=qCX7Bph48Vo[/video]
TUTORIAL 1.
How to Flash a KV.
1. Right click Flashtool360 and run as administrator
2. Go to keys at the top then tick the 2 boxes "Cpu" and "1BL" make sure the Cpu key is yours and correct
3. Then select FlashDump1.bin which should be on your USB
4. Once you have opened this then go to import then select the kv you want to flash
5. Save that file as updflash.bin
6. After you have saved the updflash then select the button patch
7. This should load up a sub section which all you need to do is enter your dvd key make sure its correct after you save the file onto your memory stick as edit01.bin
8. Once done put all the items you have saved on the memory stick including the kv
9. When you get on xbox go on xex menu and open flash360
10. It should come up with a option saying button A=Write updflash.bin to nand you press A
11. Now on the next menu select B=Raw flash without keeping current kv/Config
12. It then should come up with a warning and then press Start to continue you press Start
13. Another warning should come up press start again
14. Then it should say Select A to begin you press A
15. After this follow the instructions A)Press any button to continue B) Then it should restart your xbox
16. Then turn your jtag back on. After this is done go to xex menu and select your patch then sign into xbox live then boom your hosting.
1. Right click Flashtool360 and run as administrator
2. Go to keys at the top then tick the 2 boxes "Cpu" and "1BL" make sure the Cpu key is yours and correct
3. Then select FlashDump1.bin which should be on your USB
4. Once you have opened this then go to import then select the kv you want to flash
5. Save that file as updflash.bin
6. After you have saved the updflash then select the button patch
7. This should load up a sub section which all you need to do is enter your dvd key make sure its correct after you save the file onto your memory stick as edit01.bin
8. Once done put all the items you have saved on the memory stick including the kv
9. When you get on xbox go on xex menu and open flash360
10. It should come up with a option saying button A=Write updflash.bin to nand you press A
11. Now on the next menu select B=Raw flash without keeping current kv/Config
12. It then should come up with a warning and then press Start to continue you press Start
13. Another warning should come up press start again
14. Then it should say Select A to begin you press A
15. After this follow the instructions A)Press any button to continue B) Then it should restart your xbox
16. Then turn your jtag back on. After this is done go to xex menu and select your patch then sign into xbox live then boom your hosting.
TUTORIAL 2.
How to get your CPU Key.
First What You Going To Do Is Turn Off your Jtag And Follow The Steps Below.
1. With your Jtag Off Click The Eject Button
2. It Will Boot Into Xell.
3. When It Says Fuse 1 , Fuse 2 , ETC Take A Picture Of The Fuse Sets With a Camera or Webcam.
4. After You Have Did This Add Fuse Set 3 And Fuse Set 5 Together ( Or 4 And 6 )
5. Add Fuse Sets Together Like This
Fuse Set 3 : 12345
Fuse Set 5 : 67890
CPU : 1234567890
6. Copy You CPU And Paste in Notepad To Save For Later.
First What You Going To Do Is Turn Off your Jtag And Follow The Steps Below.
1. With your Jtag Off Click The Eject Button
2. It Will Boot Into Xell.
3. When It Says Fuse 1 , Fuse 2 , ETC Take A Picture Of The Fuse Sets With a Camera or Webcam.
4. After You Have Did This Add Fuse Set 3 And Fuse Set 5 Together ( Or 4 And 6 )
5. Add Fuse Sets Together Like This
Fuse Set 3 : 12345
Fuse Set 5 : 67890
CPU : 1234567890
6. Copy You CPU And Paste in Notepad To Save For Later.
TUTORIAL 3.
How to get your DVD Key.
Follow the Steps Bellow To Get your DvD Key On your Jtag!
1. Boot Up your Jtag And Go To XeX Menu 1.1
2. Go To Flash360 Run It Hit ( X ) To Back Up Current Nand
3. Now Its On your USB Go To The Computer And Start Up Flash360 Tool
4. Enter your CPU ( If u dont have it folow the steps above ) And the program will restart
5. Now Click the .... And Open your flashdmp.bin Thats On your USB
5. Then It Will say DvD Key And DvD OSIG Copy Both Of These And Paste In Notepad And Save For Later.
Follow the Steps Bellow To Get your DvD Key On your Jtag!
1. Boot Up your Jtag And Go To XeX Menu 1.1
2. Go To Flash360 Run It Hit ( X ) To Back Up Current Nand
3. Now Its On your USB Go To The Computer And Start Up Flash360 Tool
4. Enter your CPU ( If u dont have it folow the steps above ) And the program will restart
5. Now Click the .... And Open your flashdmp.bin Thats On your USB
5. Then It Will say DvD Key And DvD OSIG Copy Both Of These And Paste In Notepad And Save For Later.
TUTORIAL 4.
How to Fix a Bad Flash.
What Happenend?
KV was already banned
KV type was different from JTAGs version
Flashed the WRONG way
What You Need
Original NAND Dump renamed to UPDFLASH.bin
Working USB Drive
Computer
Screwed Up JTAG
How To Fix:
1. Drag the working updflash.bin into the root of the USB Flash Drive. (For novices, it means dragging it to USB)
2. Turn off the JTAG system
3. Unplug ALL Cables from JTAG
4. Plug your USB into preferably the front slot of your JTAG, use the OPPOSITE slot you flashed in.
5. Connect the AV Cable
6. Connect your Power Brick/Cable
7. Plug your JTAG into Power Outlet
8. Turn your xbox Via the **Eject button thus starting XeLL**
9. Wait for XeLL to finish updating
10. Power Cycle
Give credit to TimCrue for being the original maker of this tut
What Happenend?
KV was already banned
KV type was different from JTAGs version
Flashed the WRONG way
What You Need
Original NAND Dump renamed to UPDFLASH.bin
Working USB Drive
Computer
Screwed Up JTAG
How To Fix:
1. Drag the working updflash.bin into the root of the USB Flash Drive. (For novices, it means dragging it to USB)
2. Turn off the JTAG system
3. Unplug ALL Cables from JTAG
4. Plug your USB into preferably the front slot of your JTAG, use the OPPOSITE slot you flashed in.
5. Connect the AV Cable
6. Connect your Power Brick/Cable
7. Plug your JTAG into Power Outlet
8. Turn your xbox Via the **Eject button thus starting XeLL**
9. Wait for XeLL to finish updating
10. Power Cycle
Give credit to TimCrue for being the original maker of this tut
TUTORIAL 5.
How to Know if a KV has X Mas Lights.
Keyvault modder can be downloaded here megaupload.com/?d=F019DLWS
Step By Step Instructions:
1.Open KV Modder 1vh
2.Then press Open a KV Decrypted
3.See if it says theirs Christmas Light on it or not
If it does have Christmas Lights on it chuck it in the recycle bin and go get your money back.
Keyvault modder can be downloaded here megaupload.com/?d=F019DLWS
Step By Step Instructions:
1.Open KV Modder 1vh
2.Then press Open a KV Decrypted
3.See if it says theirs Christmas Light on it or not
If it does have Christmas Lights on it chuck it in the recycle bin and go get your money back.
TUTORIAL 6.
How to tell if a KV is a KeyLogger.
Hex Editor - [ Register or Signin to view external links. ]
Step By Step Instructions:
1.Open Hex Editor
2.Drag n Drop your KV file into Hex Editor
3.Go to Edit>Find or (CTRL + F)
4.Change Type to "Text String"
5.Search for @gmail.com ( you can also check other emails such as Hotmail, yahoo, gmail, embarqmail, aol, and other e-mails
If it doesn't have @gmail in it then its fortunately not a keylogger. Now if it does have @gmail in it then you will need to restore your account right then and their. Go to the how to restore your computer/laptop part of this thread. Full credit goes to Nato for that
Hex Editor - [ Register or Signin to view external links. ]
Step By Step Instructions:
1.Open Hex Editor
2.Drag n Drop your KV file into Hex Editor
3.Go to Edit>Find or (CTRL + F)
4.Change Type to "Text String"
5.Search for @gmail.com ( you can also check other emails such as Hotmail, yahoo, gmail, embarqmail, aol, and other e-mails
If it doesn't have @gmail in it then its fortunately not a keylogger. Now if it does have @gmail in it then you will need to restore your account right then and their. Go to the how to restore your computer/laptop part of this thread. Full credit goes to Nato for that
TUTORIAL 7.
How to Extend a KV after it's been banned.
So your hosting a modded lobby and your KV gets banned, usually you just quit and cut your losses. But wait there is a way to get at least an extra hour out of it.
Heres what you need to do:
1.Host lobby until KV is banned.
2.Unplug your power cable.
2.Wait ten seconds or so and put it back in.
3.Boot the console back up and quickly start a MW2 system link lobby.
4.While the lobby is loading connect to XBOX LIVE and you should be set to host for another 30-60 mins.
Enjoy!
So your hosting a modded lobby and your KV gets banned, usually you just quit and cut your losses. But wait there is a way to get at least an extra hour out of it.
Heres what you need to do:
1.Host lobby until KV is banned.
2.Unplug your power cable.
2.Wait ten seconds or so and put it back in.
3.Boot the console back up and quickly start a MW2 system link lobby.
4.While the lobby is loading connect to XBOX LIVE and you should be set to host for another 30-60 mins.
Enjoy!
TUTORIAL 8.
How to Unban your Jtag.
How to unban your jtag
Requirements:
Physical Items
Your Banned Jtagged Xbox w/ XBReboot Installed (Any MotherBoard)
A Donor Un-Banned Nand w/ CPU KEY (what you buy from KV sellers)
XEXLoader/XEXMenu on your console (any .xex loader)
Programs
360 Flash Tools- 360FlashTools
Flash360-Flash360
Now that you have downloaded the files, it is now time to install Flash360 to your console if you dont already have it there.
1. Place the Flash360.xex and Media Folder on the Root of a USB drive (root means not in any folders, just in the very "root" of the USB)
2. Install that USB drive into the back of your XBOX and then turn it on
3. Launch XEXLoader/XEXMenu found in your Game Demos
4. Browse the directory for the Flash360.xex file that is on your USB drive
5. Launch Flash360.xex
Getting Your XBR Image From Flash 360 onto your Computer (if its not already there)
1. Make a copy of your xbr image with Flash360 using the "X" button on screen
2. It will save it as (flashdmp.bin) to where ever you loaded Flash360.xex from (presumably the root of your USB drive)
3. Move the USB Drive with your newly dumped XBR image that you got from Flash360 onto your computer
***Note*** the XBR image that you copy from Flash360 is not your ORIGINAL Nand image, but it does contain your KeyVault and Config files in that XBR image so it is able to act as your ORIGINAL Nand
Extracting the Unbanned KeyVault from the Donor Nand (skip this step if you already have a KV_Dec.bin file)
1. Open the Donor (Unbanned) Nand file in 360 Flash Tools
2. At the Top, select the "Keys Tab"
3. Enter in the Unbanned CPU Key
4. Before moving on, Make sure to Select Both the 1BL Box And the CPU Box
Posted Image
5. Re-Open that unbanned Nand file and all of it's information should now be showing
6. Select "Extract" and then "Extract KeyVault"
7. Save it to your Desktop
8. Flash Tools will have saved it as KV_dec.bin (this is your decrypted, Unbanned KV file)
Importing The Unbanned KV (KV_Dec.bin) that You got from an Unbanned Nand
1. Remember that flashdmp.bin file you copied from Flash360 before, that is your BANNED XBR image that is going to be patched with the unbanned KV (so open that now)
2. Click the "Keys tab" and enter in the CPU key of your banned console and make sure to check the CPU box as well as the 1BL box
Posted Image
3. Re-open that XBR image and all of your info will be there (take note of the DVD-Key and the OSIG DVD-drive type as you will need it for patching the KV)
4. Now you want to select "Import" and then select "KeyVault"
5. Browse for the KV_dec.bin file that you put on your desktop from the UnBanned Nand
6. Save that newly imported XBR image as Edit01.bin
Patching the New KV to your XBR image with your info (DVD-Key/DVD-Type)
1. Open Edit01.bin and select "Patch" and then select "Keyvault"
2. MAKE SURE YOU CHANGE the DVD-Key to your banned console's DVD-Key and well as the Drive-type to your own.
3. Save that patched XBR file as updflash.bin
Re-Flashing Your Newly Patched XBR image to Your Console
1. Put that file (updflash.bin) on a USB drive and put it into your xbox (make sure Flash360.xex is still on that USB drive also)
2. Turn on your Xbox and Launch XEXLoader/XEXMenu from your Game Demos
3. Browse the Directory for the Flash360.xex and Launch it
4. Select the "A" button to Re-Flash your XBR Image
5. Select the "B" button to Flash the XBR image while using a Different KV
6. Select the "Start" button to allow a mismatch to occur
7. Select the "A" button to continue on with the Flash
8. Select the "Back" button to acknowledge the Flash has completed
9. Select the "Back" button to exit the update menu
***Note*** It is very important that you do not exit to the Dashboard after flashing the new XBR image, once you select the "Back" button twice to exit, the Flash360 has an automatic restart mechanism that will reboot your XBOX saving the Update!
How to unban your jtag
Requirements:
Physical Items
Your Banned Jtagged Xbox w/ XBReboot Installed (Any MotherBoard)
A Donor Un-Banned Nand w/ CPU KEY (what you buy from KV sellers)
XEXLoader/XEXMenu on your console (any .xex loader)
Programs
360 Flash Tools- 360FlashTools
Flash360-Flash360
Now that you have downloaded the files, it is now time to install Flash360 to your console if you dont already have it there.
1. Place the Flash360.xex and Media Folder on the Root of a USB drive (root means not in any folders, just in the very "root" of the USB)
2. Install that USB drive into the back of your XBOX and then turn it on
3. Launch XEXLoader/XEXMenu found in your Game Demos
4. Browse the directory for the Flash360.xex file that is on your USB drive
5. Launch Flash360.xex
Getting Your XBR Image From Flash 360 onto your Computer (if its not already there)
1. Make a copy of your xbr image with Flash360 using the "X" button on screen
2. It will save it as (flashdmp.bin) to where ever you loaded Flash360.xex from (presumably the root of your USB drive)
3. Move the USB Drive with your newly dumped XBR image that you got from Flash360 onto your computer
***Note*** the XBR image that you copy from Flash360 is not your ORIGINAL Nand image, but it does contain your KeyVault and Config files in that XBR image so it is able to act as your ORIGINAL Nand
Extracting the Unbanned KeyVault from the Donor Nand (skip this step if you already have a KV_Dec.bin file)
1. Open the Donor (Unbanned) Nand file in 360 Flash Tools
2. At the Top, select the "Keys Tab"
3. Enter in the Unbanned CPU Key
4. Before moving on, Make sure to Select Both the 1BL Box And the CPU Box
Posted Image
5. Re-Open that unbanned Nand file and all of it's information should now be showing
6. Select "Extract" and then "Extract KeyVault"
7. Save it to your Desktop
8. Flash Tools will have saved it as KV_dec.bin (this is your decrypted, Unbanned KV file)
Importing The Unbanned KV (KV_Dec.bin) that You got from an Unbanned Nand
1. Remember that flashdmp.bin file you copied from Flash360 before, that is your BANNED XBR image that is going to be patched with the unbanned KV (so open that now)
2. Click the "Keys tab" and enter in the CPU key of your banned console and make sure to check the CPU box as well as the 1BL box
Posted Image
3. Re-open that XBR image and all of your info will be there (take note of the DVD-Key and the OSIG DVD-drive type as you will need it for patching the KV)
4. Now you want to select "Import" and then select "KeyVault"
5. Browse for the KV_dec.bin file that you put on your desktop from the UnBanned Nand
6. Save that newly imported XBR image as Edit01.bin
Patching the New KV to your XBR image with your info (DVD-Key/DVD-Type)
1. Open Edit01.bin and select "Patch" and then select "Keyvault"
2. MAKE SURE YOU CHANGE the DVD-Key to your banned console's DVD-Key and well as the Drive-type to your own.
3. Save that patched XBR file as updflash.bin
Re-Flashing Your Newly Patched XBR image to Your Console
1. Put that file (updflash.bin) on a USB drive and put it into your xbox (make sure Flash360.xex is still on that USB drive also)
2. Turn on your Xbox and Launch XEXLoader/XEXMenu from your Game Demos
3. Browse the Directory for the Flash360.xex and Launch it
4. Select the "A" button to Re-Flash your XBR Image
5. Select the "B" button to Flash the XBR image while using a Different KV
6. Select the "Start" button to allow a mismatch to occur
7. Select the "A" button to continue on with the Flash
8. Select the "Back" button to acknowledge the Flash has completed
9. Select the "Back" button to exit the update menu
***Note*** It is very important that you do not exit to the Dashboard after flashing the new XBR image, once you select the "Back" button twice to exit, the Flash360 has an automatic restart mechanism that will reboot your XBOX saving the Update!
TUTORIAL 9.
How to fix xmas lights!
[video=youtube]http://www.youtube.com/watch?v=qCX7Bph48Vo[/video]
The following 1 user thanked -Mod for this useful post:
EvanLB7 (07-13-2012)
You are viewing our Forum Archives. To view or take place in current topics click here.