Okay so today i will show u how to Flash Dashboard version 15574 (Latest Version) on your JTAG/RGH.

What you will need:

Flash 360 - [ Register or Signin to view external links. ]

XEBuild- [ Register or Signin to view external links. ]

Your CPU Key (Can be found in Xell)

Step 1. Put flash360.xex and the media folder on the root of your USB/HDD

Step 2. Run XeX Menu and locate flash360.xex and run it.

Step 3. Backup your Current NAND by pressing (X) then (A)this will backup your nand and save a file called flashdmp.bin on your usb or hdd.

Step 4. Shut down your console then turn it on by Pressing the disc tray button. Once Xell opens, look at fuseset 3 and 5 and write them down EXACTLY how they look. Triple check that u copied it right. If you didnt and u flashed a wrong key. you could **** up your jtag permanantly.

Step 5. Open XEBuild and for the source file find your flashdmp file and open it in xe build. Then it will fill in all the info for you. Leave output file alone.

Step 6. In XEbuild in the cpu key line type in your cpu key EXACTLY how your wrote it down.

Step 7. Click Generate hacked Image. Once done click yes then Go back to your xbox.


Step 8. Go back to your xbox, Run flash 360, and this time press (A) (B) (START) (START) (A)

Step 9. Once done if it asks u to shut down, wait for it. If not just go back to the main menu of Flash360, then turn off your console by pressing the power button.

Step 10. Wait about 30 seconds, then turn your JTAG/RGH back on, and you should be ont he newest dash