CLuTcHxMoDzz wrote Thank's bro, I can take my RGH online now...
Going to wait until I have a couple KV's to use as backup in case I get banned

NWA wrote This is a good TUT, But flashing your new hacked image to the console doesn't need to be complicated. Just put the updflash.bin on a USB, put the USB in the console and boot Xell and it will raw flash it for you. Restart the console and enjoy the new dashboard.

MODWORLDS wrote Hey guys, this is for people who wanted to update there jtag/rgh to 16202. before i start, i copy this guide off another website that I'm about to show you and i give them full credit for it. so don't say guide stealer or theft! something like that. and also i may change a few words around just to make it alot of sense. so lets get started.
OH! also you are responsible for your own action if you mess up! don't blame it on me. now lets get started!

Edit: The download link to the xeBuild will have the system update files for 16202 if your looking for one.

Update: As mafia said, Use J-Runner for recommended used if you think it might have Bad Blocks, cause J-Runner does supports it. but when i made my nand on xeBuild, i use J-Runner to check to see if i did have any bad blocks and i didn't (thank god lol). and also This xeBuild and J-Runner you can find on google does have Dashlaunch 3.05 for 16202 support. so no worry's.

What you need:

1 An xbox360 jtagged

2 A computer

3 And a usb flash drive that must "FAT32 formatted"

4 And a brain!!!
----------------------------------------------------------

1 : First of all plug usb drive with computer and format as Fat32. then copy "flash 360" folder in root of usb drive (sorry that i don't have the flash 360 to give but you probably can get it from the download on this site.)

2 : plug usb drive with xbox360 and turn it on.

3 : launch xexmenu or fsd and go to usb drive and then "flash 360" folder and run Flash360.xex file.

4 : You,ll see three options :

Button A : write updflash.bin to nand

Button B : write update areas of rebooters

Button X : backup current nand to file

now be careful press X button from your 360 controller to backup nand and then it will ask for

save entire nand then press A button to continue.

that will save your nand backup named "flashdmp.bin" file in the root of "flash 360" folder on the usb drive.

5 : shutdown your xbox360 console and remove usb drive from xbox360.

6 : plug usb drive to your computer and just copy "flashdmp.bin" file from "flash 360" folder to your pc anywhere you want. (make sure you make a back up from this!!! always do so!!)

7 : now you have to need your cpu key. its very simple just press eject button on xbox360 console and wait for boot

8 : once cpu key shows up bottom of your screen, please read very carefully and copy it down on a paper and make a .txt (text document) (or if you can't see the key text very good, just type the IP Address that shown on your console and type it on your web browser on the computer and it will show every thing what your console have plus the keys
(make sure you have ether net cord plug up to console when you want to get the keys from the web browser)

once you get your keys copy, save em some where.

9 : now download "xeBuild_GUI_2.087" file and unrar it and you,ll find "xeBuild_GUI_2.087" folder.

[ Register or Signin to view external links. ]

Click to View Content

Fixed: No longer enforcing RGH 1.0 for trinity, please beware that ECC creation might not work with the RGH 2.0 script, however the RGH 1.x script works perfectly with any trinity version to date (except for 15572+ updated machines of course!)
- Updated: Now using xeBuild 1.06
- Updated: Now using Dashlaunch 3.05
- Updated: Now building 2.0.16202.0
- Updated: XMLs have been updated like ussual with the location and MD5 hash of the new update files
- Added: Ive now written a full tutorial on how to use this GUI to update your JTAG/RGH Console, you can find it here: [ Register or Signin to view external links. ] its also linked by the Tutorial menu item in the GUI (itll open in your default webbrowser)
V3.05
- add 16202
- update spanish translation (thanks gromber!)
- fix remotenxe and windows button on remote not booting to dash (thanks spkleader!)

V3.04
- kinect health message block fixed for 16197
- updated polish translation (thanks Pelcu!)
- fix CIV hook issue, may break some titles that use CIV (a gamy Call of Decay: Body Odor 2 now works)
- lump updater version limit patch into noupdater option so it can be disabled
- improved installers ability to prevent install on unsupported kernels (including devkit and unsupported retail versions)
- installer will now only offer to update, if the embedded version is newer than currently running one

10 : run "xeBuild GUI 2.0.exe" file from this folder

11 : expand "kernel version" and set 2.0.16202.0. (if this already set 2.0.16202.0 so leave it as it is)

and now click on source file "open" button and open "flashdmp.bin" file you just copied from usb drive to your computer.

12 : now click on "Get cpukey from keys.txt" button and open your saved cpu key.

(or if you did copy and paste you keys meaning you saved your key somewhere on the computer, just copy that key again and paste your CPU key in the CPU key box and that be fine.)

13 : and click on output path "save" button and named it "updflash" then save it where you want.

14 : then hit "Generate hacked image" button and wait a while then it,ll pop up a message and click on "yes" button.

15 : now copy "updflash.bin"( you have just created and saved in wherever your computer ) to "flash 360" folder in usb drive.

16 : remove usb drive from computer and plug in xbox360. now turn on your xbox360.

17 : launch xexmenu or fsd and go to usb drive and then "flash 360" folder and run Flash360.xex file.

18 : You,ll see these three options again :

Button A : write updflash.bin to nand

Button B : write update areas of rebooters

Button X : backup current nand to file

now press A button from your 360 controller to write updflash.bin. then press A again to "raw flash with keeping current kv/config"

then press A Button then start button to continue.

19 : let it 100% complete then press any button then back buttton after countdown unplug your xbox360 power cable and av cables and any attached hdd for 2 minutes.

20 : after 2 minutes plug back all cables and turn on your xbox360 then configure your new 16202 dash do not connect live just enjoy your new dash.

Hope you all enjoy the guide! and if you get confused on the making the new hack image, just watch this video.

Thanks and good luck to you all! leave a like if you wish [b]

MODWORLDS wrote

NWA wrote This is a good TUT, But flashing your new hacked image to the console doesn't need to be complicated. Just put the updflash.bin on a USB, put the USB in the console and boot Xell and it will raw flash it for you. Restart the console and enjoy the new dashboard.

Yeah but it's really not complicated to use flash360 to update your console, it's easy if you know what your doing and half of the people i know use the flash360 way. But i understand what you mean though.

jza802k wrote after updating, my avatar no longer shows up