Well I'm going to start with my falcon problem. I recently jtagged this since it was on a low dashboard and it was all well. It received the e79 error so I did a alternate point to the aud_clamp and still didn't work. But I flipped the switch in the Jtag board I installed and it was working great. Booted into xell and then wrote the free boot image. Tested everything worked great. Put it all back together and booted it with hdmi and the screen froze. Booted with regular av booted just fine. Then I tried booting into xell it wouldn't work just sit there at black screen. And then tried booting console normally it had e79 error but switched to hdmi console boots but the freezes. So I don't know.

Now my xenon problem. I got the Jtag all installed and booted xell and then created the free boot image and then went to write it and it said for everything error 000 cannot write to *** so I tried putting stock NAND back and my NAND reader won't even connect to the console. My soldering is good so I don't know what is wrong. It just giving me errors while trying to write back into it.


So if anyone can help me please let me know