Where is the cool runner ? Its not their.

5KMods wrote

tmrxdubstep wrote

5KMods wrote Where are the rest? CPU_RST, POST_OUT1,STB_CLK AND COOLRUNNER?

took it all off to see if that was the problem as i did try to glitch first boot attempted waited about 10mins and i didn't boot so i changed 2-3 jumper settings to 1-2 and change the cpu_rst to the shielded cable and it didnt even try to glitch so i put it back and then the xbox stopped working so i took the coolrunner off and tried flashing the original nand and i started getting that error and i tried turning it on and it was dead

Please post images of these areas to rule out damage.

Remove your nandx harness also and see if it turns on again.

What color is your power supply light?

cpu_rst
[ Register or Signin to view external links. ]

post_out (can remove glue if you want but its not damaged)
[ Register or Signin to view external links. ]

stby_clk (again can remove glue if you like but its not damaged)
[ Register or Signin to view external links. ]

3v3, i2c_scl & i2c_sda
[ Register or Signin to view external links. ]

have tried taking everything off and booting but psu stays orange no matter what i do and the psu works as i tried it in another 360 thanks for the help btw

Crazy_Horse_RDR wrote Where is the cool runner ? Its not their.

on the table next to it lol

oh and when the coolrunner was installed and the xbox wouldnt turn on the power led on the coolrunner was lit

What dashboard were you on? Is this a jasper did you select the write nand size i.e. (16mb,256mb,512mb)

Pictures arent the best but from what you've shown doesnt look like a problem.

5KMods wrote What dashboard were you on? Is this a jasper did you select the write nand size i.e. (16mb,256mb,512mb)

Pictures arent the best but from what you've shown doesnt look like a problem.

yea sorry about the pictures

was the newest dash 16537 or 16203 not to sure, yea its a 16mb knew they had different size nands so i google it

FLASHCONFIG - MOTHERBOARD TYPE
01198010 - Xenon, Zephyr, Opus, Falcon
00023010 - Jasper 16mb, Trinity 16mb <<<< the code i got in j-runner
008A3020 - Jasper 256mb
00AA3020 - Jasper 512mb

only thing i can think off is that i used "RGX_jasper.ecc" that i downloaded from a forum that said it gave better boot times, this is my first time rghing a jasper

well the released ecc for 14719+ are fine as long as thats what was written.

Its got to be a dead short on the board or something happened to the nand.

5KMods wrote well the released ecc for 14719+ are fine as long as thats what was written.

Its got to be a dead short on the board or something happened to the nand.

theres no shorts on the board been over and over it, i did notice that when i was dumping the nand and getting ready to write the ecc j-runner kept changing from rgh2 to jtag i just kept changing it back and made sure its was on rgh2 before i wrote anything do you think that could of caused the problem ( im so lost with this one )

tmrxdubstep wrote

5KMods wrote well the released ecc for 14719+ are fine as long as thats what was written.

Its got to be a dead short on the board or something happened to the nand.

theres no shorts on the board been over and over it, i did notice that when i was dumping the nand and getting ready to write the ecc j-runner kept changing from rgh2 to jtag i just kept changing it back and made sure its was on rgh2 before i wrote anything do you think that could of caused the problem ( im so lost with this one )

Can you open your nanddump and click re-int dont touch anything then screen shot it please

5KMods wrote

tmrxdubstep wrote

5KMods wrote well the released ecc for 14719+ are fine as long as thats what was written.

Its got to be a dead short on the board or something happened to the nand.

theres no shorts on the board been over and over it, i did notice that when i was dumping the nand and getting ready to write the ecc j-runner kept changing from rgh2 to jtag i just kept changing it back and made sure its was on rgh2 before i wrote anything do you think that could of caused the problem ( im so lost with this one )

Can you open your nanddump and click re-int dont touch anything then screen shot it please

there you go mate

[ Register or Signin to view external links. ]