You are viewing our Forum Archives. To view or take place in current topics click here.
Bad Nand flash (Need Help)
Posted:
Bad Nand flash (Need Help)Posted:
Status: Offline
Joined: Jun 04, 201113Year Member
Posts: 741
Reputation Power: 32
Status: Offline
Joined: Jun 04, 201113Year Member
Posts: 741
Reputation Power: 32
Hey TTG its been a while,
Looking at some of my old consoles I decided to pull out my RGHed Falcon.
the last time I used it, I tried to flash a update to it and now it does not boot into the Dash Or Xell Reloaded. The Cool runner chip (REV. B)'s Red light stays solid, and the green light turns on for 5 or so seconds then shuts off for 1 second then back on for 5, and it repeats that. I do have the Original Nand and information for the console, but i have no way of turning it on to reflash the good nand. (Side note, i can sync controllers) I have tried many things such as Hdmi or AV. Nothing ever shows up on the screen.
I do not own a Nand-x or any of the equipment to re flash it that way, but if anyone has some ideas I could try they would be greatly appreciated. If it boils down to having to buy a flasher, what would be the cheapest setup? Lpt?
Thanks!
-Dev
Looking at some of my old consoles I decided to pull out my RGHed Falcon.
the last time I used it, I tried to flash a update to it and now it does not boot into the Dash Or Xell Reloaded. The Cool runner chip (REV. B)'s Red light stays solid, and the green light turns on for 5 or so seconds then shuts off for 1 second then back on for 5, and it repeats that. I do have the Original Nand and information for the console, but i have no way of turning it on to reflash the good nand. (Side note, i can sync controllers) I have tried many things such as Hdmi or AV. Nothing ever shows up on the screen.
I do not own a Nand-x or any of the equipment to re flash it that way, but if anyone has some ideas I could try they would be greatly appreciated. If it boils down to having to buy a flasher, what would be the cheapest setup? Lpt?
Thanks!
-Dev
#2. Posted:
Status: Offline
Joined: Apr 28, 201410Year Member
Posts: 45
Reputation Power: 1
When mine had the same symptoms all i had to do was press the power button then less than 3 seconds later press the eject button. it booted up and turns out it was just my plug-ins through dashlaunch. good luck, sorry if that was no help.
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Feb 20, 201410Year Member
Posts: 890
Reputation Power: 40
Status: Offline
Joined: Feb 20, 201410Year Member
Posts: 890
Reputation Power: 40
This is not a problem with plugins you bricked your console you will need to send it in to get it fixed look at one of the turdted sellers for info about getting it fixed
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Aug 26, 201311Year Member
Posts: 123
Reputation Power: 4
Status: Offline
Joined: Aug 26, 201311Year Member
Posts: 123
Reputation Power: 4
killzone1620 wrote This is not a problem with plugins you bricked your console you will need to send it in to get it fixed look at one of the turdted sellers for info about getting it fixednot necessarily true.
If you have your original Nand info then try putting it onto a usb and load into xell (if you can) and go from there
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: Dec 30, 201212Year Member
Posts: 3,778
Reputation Power: 3016
Status: Offline
Joined: Dec 30, 201212Year Member
Posts: 3,778
Reputation Power: 3016
You would have to flash your original nand to your console through a nand-x in order for it to work properly. If you can't get Xell to work.
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.