try use simple 360 nand flasher instead. you cant give any rep you dont have any

I used that to flash it put now am stuck and get black screen because of bad nand

So let me get this straight. You tried to dump your NAND off your Trinity RGH and you got a bad dump? Correct?
And it wont go onto your computer?

Thats it I dumped the updflash.bin using flash360 and then when I openned it I got black screen.And now I openned it and dont no how to reflash the nand. Its a x360ace.

XexHosTxeX wrote Thats it I dumped the updflash.bin using flash360 and then when I openned it I got black screen.And now I openned it and dont no how to reflash the nand. Its a x360ace.

Do you still have your old flashdmp.bin (the file you get after dumping your nand)? If so, get a USB, delete everything off of it and put the flashdmp.bin on there.

Now, rename the flashdmp.bin to updflash.bin and stick the USB in your console.

After doing all of this, boot into Xell. It should automatically re-flash your nand.

Once it's done, just reboot and you should be good to go.

Theres juste one problem with that. I cant boot in xell.

I thought the ace chip was for corona only?

From what I see, unless you have some sort of nand r/w kit seperate from the x360ace you're SOL. Doesn't look like that chip can r/w the nand unless it has some sort of slave board similar to squirt360.

Edit: Just looked it up and it doesn't connect to any of the nand points, you need something else to actually r/w to the nand.

HarmfulMushroom wrote From what I see, unless you have some sort of nand r/w kit seperate from the x360ace you're SOL. Doesn't look like that chip can r/w the nand unless it has some sort of slave board similar to squirt360.

Edit: Just looked it up and it doesn't connect to any of the nand points, you need something else to actually r/w to the nand.

What is an x360ace anyway?