You are viewing our Forum Archives. To view or take place in current topics click here.
Falcon RGH 1.2 wont boot into Xell
Posted:
Falcon RGH 1.2 wont boot into XellPosted:
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
I would dm someone personally, but id rather have this public so I can get as many suggestions as possible. I am trying to boot Xell so I can grab my CPUKey from my console. I programmed all timing files onto my coolrunner to see if any work & I wrote the ECC to my motherboard, but when I boot up the console it never shows anything on screen. Any fixes? Here are a few pics of my soldering for the coolrunner
[ Register or Signin to view external links. ]
EDIT: I forgot to add, when I flash my retail nand to the console to see if it boots, I get 3 red rings with a 0022 error code
[ Register or Signin to view external links. ]
EDIT: I forgot to add, when I flash my retail nand to the console to see if it boots, I get 3 red rings with a 0022 error code
#2. Posted:
Status: Offline
Joined: Nov 27, 201311Year Member
Posts: 474
Reputation Power: 20
0022 - CPU error, generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints)
- 0useful
- 0not useful
#3. Posted:
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Paul- wrote 0022 - CPU error, generally caused by a poor connection to the mainboard (cold solder joints/bridged solder joints)
So how would I fix that. Unsolder everything?
- 0useful
- 0not useful
#4. Posted:
Status: Offline
Joined: Nov 27, 201311Year Member
Posts: 474
Reputation Power: 20
Quick question what are you using to flash nand.
- 0useful
- 0not useful
#5. Posted:
Status: Offline
Joined: May 24, 201014Year Member
Posts: 10,103
Reputation Power: 3697
Status: Offline
Joined: May 24, 201014Year Member
Posts: 10,103
Reputation Power: 3697
desolder the coolrunner, reflash original nand again after cool runner is uninstalled. if you still have red ring well , you'll have to repair that first before you can continue rgh'ing.
if rrod is still present after reflash then you need to perform a reflow/reball.
if rrod is still present after reflash then you need to perform a reflow/reball.
- 0useful
- 0not useful
#6. Posted:
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Streamah wrote desolder the coolrunner, reflash original nand again after cool runner is uninstalled. if you still have red ring well , you'll have to repair that first before you can continue rgh'ing.
if rrod is still present after reflash then you need to perform a reflow/reball.
Yeah its still there. I have no clue how to reflow/reball though
- 0useful
- 0not useful
#7. Posted:
Status: Offline
Joined: May 24, 201014Year Member
Posts: 10,103
Reputation Power: 3697
Status: Offline
Joined: May 24, 201014Year Member
Posts: 10,103
Reputation Power: 3697
From the sounds of it, it sounds like there may have been some pulling on the heatsinks to get the mobo in and out. that may be where you created your problem.
if a board 0022's on me, it goes right in the garbage as i feel as though selling already rrod boards is not acceptable in my honest opinion.
if a board 0022's on me, it goes right in the garbage as i feel as though selling already rrod boards is not acceptable in my honest opinion.
- 0useful
- 0not useful
#8. Posted:
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Streamah wrote From the sounds of it, it sounds like there may have been some pulling on the heatsinks to get the mobo in and out. that may be where you created your problem.
if a board 0022's on me, it goes right in the garbage as i feel as though selling already rrod boards is not acceptable in my honest opinion.
I was gonna use it as a personal rgh not sell it. Is there a way I can fix it? or do I have to send it to someone
- 0useful
- 0not useful
#9. Posted:
Status: Offline
Joined: May 24, 201014Year Member
Posts: 10,103
Reputation Power: 3697
Status: Offline
Joined: May 24, 201014Year Member
Posts: 10,103
Reputation Power: 3697
Paqs wroteStreamah wrote From the sounds of it, it sounds like there may have been some pulling on the heatsinks to get the mobo in and out. that may be where you created your problem.
if a board 0022's on me, it goes right in the garbage as i feel as though selling already rrod boards is not acceptable in my honest opinion.
I was gonna use it as a personal rgh not sell it. Is there a way I can fix it? or do I have to send it to someone
You can attempt to do a home repair on a 0022 but in all honesty you could buy a new console for the cost of the repair. if they can fix it.
- 0useful
- 0not useful
#10. Posted:
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Status: Offline
Joined: Mar 14, 201410Year Member
Posts: 287
Reputation Power: 19
Streamah wrotePaqs wroteStreamah wrote From the sounds of it, it sounds like there may have been some pulling on the heatsinks to get the mobo in and out. that may be where you created your problem.
if a board 0022's on me, it goes right in the garbage as i feel as though selling already rrod boards is not acceptable in my honest opinion.
I was gonna use it as a personal rgh not sell it. Is there a way I can fix it? or do I have to send it to someone
You can attempt to do a home repair on a 0022 but in all honesty you could buy a new console for the cost of the repair. if they can fix it.
**** sakes okay. So if I buy another console to RGH just make sure not to pull on the heat sinks and I should be fine?
- 0useful
- 0not useful
You are viewing our Forum Archives. To view or take place in current topics click here.